How about putting the Trigger/CALC blocks in a separate 'third' CP? Regards, Martin Theobald -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of BrianLong Sent: 16 February 2009 16:28 To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Accum Block Reset Tried it both ways, one calc block resetting both accums in different nodes and identical calc blocks resetting accums in each node. Also, I added the TIM instruction to the calc blocks in each node to see if the clocks are off. They appear to be the same. Period and phase of CP's, calc's and Accum's same. Brian -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of duc.do@xxxxxxxxxxxxxx Sent: Monday, February 16, 2009 9:30 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Accum Block Reset Brian, If the two CP's can communicate (on same LAN) the easiest solution would be to trigger the reset from one source. Have logic in, say, a LOGIC/CALC/CALCA block running in one CP and reset both ACCUM blocks. But I sense that this is not doable, otherwise you'd have done it already, no? Duc -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of BrianLong Sent: Monday, February 16, 2009 10:05 AM To: Foxboro Subject: [foxboro] Accum Block Reset Question? Accum1 runs in CP1, node1 Accum2 runs in CP2, node2 I need to reset both accum blocks at the same time. Right now they are close but not close enough which is surprising since both CP's are lightly loaded. I wanting to generate the reset in the CP not in CRON if possilbe. I'm using the CPx_STA:STATION.HOUR parameter currently to do the reset (clear). Thanks in Advance, Brian Long Arkansas Kraft _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave * Confidentiality Notice: This e-mail and any associated files are intended solely for the individual or entity to whom they are addressed. Please do not copy it or use it for any purposes, or disclose its contents to any other person. Further, this e-mail and any associated files may be confidential and further may be legally privileged. This email is from the Invensys Process Systems business unit of Invensys plc which is a company registered in England and Wales with its registered office at Portland House, Bressenden Place, London, SW1E 5BF (Registered number 166023). For a list of European legal entities within the Invensys Process Systems business group, please click here http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77. If you have received this e-mail in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Thank you for your co-operation. You may contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave