[foxboro] Accum Block Reset
- From: "BrianLong" <blong@xxxxxxx>
- To: "Foxboro" <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 16 Feb 2009 09:05:18 -0600
Question?
Accum1 runs in CP1, node1
Accum2 runs in CP2, node2
I need to reset both accum blocks at the same time. Right now they are close
but not close enough which is surprising since both CP's are lightly loaded.
I wanting to generate the reset in the CP not in CRON if possilbe. I'm
using the CPx_STA:STATION.HOUR parameter currently to do the reset (clear).
Thanks in Advance,
Brian Long
Arkansas Kraft
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Accum Block Reset - BrianLong
