right. I would rather freeze than roast anyway. JC On Tue, Dec 21, 2010 at 11:23 PM, Robert Adams <elcam84@xxxxxxxxx> wrote: > Knew you would get a laugh out of it. :) :) :) > > We'll get our payback next summer. > > > Robert Adams > > On Tue, Dec 21, 2010 at 11:08 PM, John Christensen <johncgg@xxxxxxxxx>wrote: > >> yeah .... Thanks for the voice mail Robert LOL. Payback is a >> bitch.Careful. >> JC >> >> >> >> On Tue, Dec 21, 2010 at 9:37 PM, Jim Dos <jdos@xxxxxxxxxxxxx> wrote: >> >>> That’s about what John and I are looking at.. >>> >>> Got another wet 5” last night.. >>> >>> Oh joy of Winter.. >>> >>> Bah. >>> >>> >>> >>> J >>> >>> >>> >>> *From:* elky-bounce@xxxxxxxxxxxxx [mailto:elky-bounce@xxxxxxxxxxxxx] *On >>> Behalf Of *Ray Buck >>> *Sent:* Tuesday, December 21, 2010 7:17 PM >>> *To:* elky@xxxxxxxxxxxxx >>> *Subject:* [elky] Re: Ugly weather >>> >>> >>> >>> I otta smack ya... >>> >>> >>> >>> Same thing forecast all week....yeah, I know....it's winter and all, but >>> somebody otta tell yer weather gods. >>> >>> As least my RTV fix stopped the leak at the top of the windshield and I >>> don't have to drive around with a towel over the steering column. C'mon >>> spring! >>> >>> r >>> >>> >>> On 12/21/2010 1:54 PM, Robert Adams wrote: >>> >>> >>> >>> >>> >>> Well the weather is not really getting any better here. It >>> was 80* yesterday and 83* right now with a heat index of 85 may hit 85* in a >>> bit. Was sweating in the car today cause I don't like running the AC if I >>> don't have to. >>> >>> >>> >>> >>> >>> Back out to work on the laundry room. More pics to >>> come. Here is the latest one though. >>> http://s97.photobucket.com/albums/l206/elcam84/new%20house/?action=view¤t=028.jpg >>> >>> >>> >>> >>> I have a half sheet already installed in that >>> corner. As you can see I also add blocking between the joists and up against >>> the rim joist. This just makes it a little stronger and gives more support >>> to the wall above it. The floor is pretty stiff as is but I may add another >>> layer of 1/2" before the 1/4" hardi board and tile. The 3/4 is under the >>> walls and I may run the 1/2" under them as well and shorten the wall a >>> little (the studs are too long at 94.5 anyway). >>> >>> Been debating how I want to do the floors as in how >>> thick. The kitchen is planned to be solid wood. The house has 7/8 tongue and >>> groove for it's base subfloor which is hard to equal up to these days and >>> most of the house has 3/4 and some places have another 1/4" underlayment. >>> goofy >>> >>> >>> >>> >>> >>> >>> >>> Robert Adams >>> >> >> >