[duxuser] Re: embossing problem
- From: "Gary Metzler" <gmtravel@xxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Mon, 31 May 2010 07:50:08 -0400
Hi Kathy,
Sometimes the simple things elude us. You're right, I won't soon forget 2e.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of kathy riessen
Sent: Monday, May 31, 2010 1:33 AM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: embossing problem
Hi Gary,
Best laugh I've had all day!!!! That's laughing with you of course, not at
you.
The number of times I emboss something and find that I forgot to realign
the top of the page with good old 2e isn't worth counting.
You'll never forget that one now.
Kathy
> Hi George,
>
> I tried hitting 2e before embossing anything and guess what. It is
> embossing at the top of the page as it should. I tried embossing the file
> I
> was having a problem with and all is well.
> By the way did her Majesty ever give you that Knighthood that you so
> richly
> deserve? Thanks for all the good you do for us.
> _____
>
> From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of George Bell
> Sent: Sunday, May 30, 2010 5:02 PM
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: embossing problem
>
>
> Sorry, Gary. I should have made it clear I'm referring to the Juliet's
> panel.
>
> George.
>
> _____
>
> From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of George Bell
> Sent: 30 May 2010 21:54
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: embossing problem
>
>
>
> Hi Gary,
>
> Does this happen even after setting top of form via the control panel?
>
> George.
>
> _____________________________________________
> From: duxuser-bounce@xxxxxxxxxxxxx [
> <mailto:duxuser-bounce@xxxxxxxxxxxxx>
> mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Metzler
> Sent: 30 May 2010 18:52
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] embossing problem
>
> Hi All,
>
> I am running dbt 10.5 with a Juliet pro 60 embosser. Lately I have been
> noticing that the documents have been starting embossing about a quarter
> of
> the way down the page. It is the same on both sides. I use 8.5 x 11 inch
> paper. Is there some settings I need to check and change? Any help would
> be most appreciated. Thanks,
>
> Regards, Gary Metzler
> <http://outtasighttravel.com/> http://outtasighttravel.com
> sendto:gmtravel@xxxxxxxxxxxxx
> messenger:gmetzler1150@xxxxxxxxxxx
> skype: garymetz
>
>
>
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
