Sorry, Gary. I should have made it clear I'm referring to the Juliet's panel. George. ________________________________ From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: 30 May 2010 21:54 To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: embossing problem Hi Gary, Does this happen even after setting top of form via the control panel? George. _____________________________________________ From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx <mailto:duxuser-bounce@xxxxxxxxxxxxx> ] On Behalf Of Gary Metzler Sent: 30 May 2010 18:52 To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] embossing problem Hi All, I am running dbt 10.5 with a Juliet pro 60 embosser. Lately I have been noticing that the documents have been starting embossing about a quarter of the way down the page. It is the same on both sides. I use 8.5 x 11 inch paper. Is there some settings I need to check and change? Any help would be most appreciated. Thanks, Regards, Gary Metzler http://outtasighttravel.com <http://outtasighttravel.com/> sendto:gmtravel@xxxxxxxxxxxxx messenger:gmetzler1150@xxxxxxxxxxx skype: garymetz