[duxuser] Re: Embossing with 10.5 and a Versa-Point Duo
- From: "Mark Mercer" <markm@xxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Mon, 13 Sep 2004 16:34:46 -0400
MessageHi Caroline,
Her's all of the commands together:
OL Off Line
0*1# Menu #1
10*0# Word Wrap Off
14*30# Right Margin set at 30
1*0# Make this Menu the Power on Default
1*1# Save these settings
Best Regards,
Mark
----- Original Message -----
From: Caroline Congdon
To: duxuser@xxxxxxxxxxxxx
Sent: Monday, September 13, 2004 4:24 PM
Subject: [duxuser] Re: Embossing with 10.5 and a Versa-Point Duo
Hi all. Well, it's working now, sort of. I think I know what the problem is
though, and just need to locate my manual in order to correct the problem.
When I first got the embosser, I believe I turned word wrap to on. Now what's
happening is that lines, (however, still only on even pages), are being
truncated and finished on the line below. So, I think once I fix that I'll be
all right. If anyone knows that setting that would be helpful. Thanks again.
Caroline
Other related posts:
