[duxuser] Re: Embossing with 10.5 and a Versa-Point Duo
- From: "Mark Mercer" <markm@xxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Mon, 13 Sep 2004 15:48:13 -0400
MessageHi Caroline,
OOPS! The key legend uses * and # for . and E the correct entry is below:
0*1#, 14*30#, 1*1#
Best Regards,
Mark
----- Original Message -----
From: Caroline Congdon
To: duxuser@xxxxxxxxxxxxx
Sent: Monday, September 13, 2004 3:36 PM
Subject: [duxuser] Embossing with 10.5 and a Versa-Point Duo
Hi all. Today is the first time I've needed to emboss since installing 10.5
a couple of weeks back. I'm running into a problem. I set up the paper as
narrow 11/inch, told the global embosser settings to default to a line of 30
characters, and 25 lines per page. Interpoint is also checked. The front page
prints great, but even pages are most definitely not correct. It's printing
the last 25 characters on each line, and the first couple of characters are
showing up on the perforation. What am I not seeing here? Thanks in advance
for any suggestions.
Caroline
Caroline Congdon; Milwaukee, Wisconsin
mailto:carolinecongdon@xxxxxxxxxxxxx
Web Site: http://home.earthlink.net/~carolinecongdon/
AOL IM: carolinecongdon@xxxxxxxxxxxxx
Yahoo IM: kb9qqz
MSN IM: carolinecongdon@xxxxxxxxxxx
Other related posts:
