[softwarelist] Re: DPScan + ARMini -> crash?
- From: Bernard Veasey <bernard@xxxxxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Wed, 13 Jul 2011 13:43:09 +0100
In message <egXy+VCdjXHOFwrp@xxxxxxxxxxxxxxxxxxx>
David Pilling <flist@xxxxxxxxxxxxxxxxxxx> wrote:
> Hi,
> In message <ab4c1af251.john@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>, John Crane
> <john@xxxxxxxxxxxxxxxxxxxxxxxx> writes
>>I never reported it to the list but it did crash in the same way as
>>described by others. I set the run file to -1, which did seem contrary
>>to what was suggested for the Iyonix in the ReadMe, but it worked so I
>>never gave it another thought. This was (is) DPScan V1.23
>>Don't know if this helps, but at least it shows the behaviour' been
>>around a while.
> There is no doubt that using dynamic areas will make DPScan more
> reliable, and no doubt it crashes sometimes.
> It seems a bit of a stretch to say the above is exactly the same problem
> as on the ARMini though.
> If anyone could reproduce the problem on Iyonix today, that would be
> different.
> However, it's an interesting point because RISC OS on Iyonix must
> converge with RISC OS on ARMini at some point. My Iyonix is on an
> ancient version of RISC OS so not much use.
Just to confirm that I can use DPScan 1.25 without problems on my
Iyonix with RISC OS 5.16 and 512MB of memory.
Bernard
--
Contact Me - http://www.bapfish.org.uk/contactme/
Web - http://www.bapfish.org.uk/
To unsubscribe or subscribe goto: //www.freelists.org/list/davidpilling
Other related posts:
