Hi, so here's what I think was happening. As you correctly said, when I said
acknowledge it must've put the simulator into pause mode back on the
flightplan screen. At the time I didn't realise this was was the case and
that's why I was reading through the manuals just to try and find a reason for
it going back to the flightplan screen. Obviously it just went into pause, so
I guess my only question is once this happens how do I get back onto my active
flight screen. I realise now that I should have simply said report traffic
insight at the time. I apologise for making things more confusing,
Thanks Declan.
On 17 Feb 2017, at 16:46, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Hello Declan,
I was merely responding to your question using the information your provided
as a basis for analysis.
If as you stated, you responded with the phrase "Acknowledge" in response to
an ATC controller indicating that there is traffic nearby, that would have
cause IYP to emit the "1" key which would have selected the option to [Select
a New IFR destination] from the ATC menu. By doing so, the simulator would
have been placed in the pause mode and the "flight plan" panel would have
properly popped-up in order to facilitate IFR selection.
If on the other hand, your would heve responded with (as I stated), "We have
the traffic", or "Traffic in sight", that would have cause IYP to emit the
"2" key (the required response) and the flight would have contined as normal.
Thus, I am confused by your statement... "I've made sure to read all the
manuals".
Regrettably at this point, I neither know how to proceed, nor how I can help
you.
Robert
On Fri, Feb 17, 2017 at 3:29 AM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Hi, I've made sure to read all the manuals, but despite that when ever I am
flying the game sometimes puts me back on the flightplan screen. Is this the
game crashing or the aircraft? I can't think of any reason why the aircraft
itself would have crashed, but is that the simulators way of telling me I
crashed the aircraft?
On 17 Feb 2017, at 00:36, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
As I believe I stated previously, you really need to go through the
SimpleATC command set. The proper response in this instance is documented
as:
Traffic in the Area
If ATC states that you have traffic in your area, and asks you to report
that you have the traffic in sight, simply say,
"Traffic in sight", or "We have the traffic"
I strongly suggest that, despite your anxious feelings to get airborne,
consider that you're going to be flying a "real airplane". With that said,
you'd never take off without reading ALL of the manuals... especially the
sections involving the extremely complex ATC communications protocols.
Please go here:
Select BLIND PILOTS CLICK HERE
Find and select Site Map
Find and select Simple ATC Communications
There you will find the following sections under IFR:
Ensure Flight Plan is Loaded Properly
Get Weather
Departing from a Non-Towered Airport
Request IFR Clearance
Announce Taxi Intentions
Announce Takeoff Intentions
Departing from a Towered Airport
Request IFR Clearance
Request Taxi Clearance
Request Takeoff Clearance
En Route ATC Communications
After Departing from a Non-Towered Airport
After Departing from a Towered Airport
ATC En Route Directives and Communications
Landing at a Non-Towered Airport
Performing an ILS Approach at a Non-Towered Airport
Performing a Visual Approach at a Non-Towered Airport
Landing at a Towered Airport
Performing an ILS Approach at a Towered Airport
Performing a Visual Approach at a Towered Airport
SimpleATC Command Set
Robert
On Thu, Feb 16, 2017 at 3:52 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
So just a quick query, I was flying when the controller informed me of
traffic four miles at 12 o'clock. I said acknowledge but nothing happened
so I assumed it would be fine. About a minute later my Sim crushed and
jaws said I was back on the flight plan screen, but I couldn't explore
the interface with the keyboard , does this mean my aircraft crashed?
It's your plane was also responding to my command still but I have no
sound of the aircraft.
Sent from my iPhone
On 16 Feb 2017, at 22:38, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
I am out of the office. Will be back in 2 hours.
R
On Feb 16, 2017 1:40 PM, "Declan Webster" <declan.webster44@xxxxxxxxx>
wrote:
Hi, I've managed to get my registration code, and by the way I'm using
this email address, but now when I enter the code it just wipes out what
I've written and says it's wrong everytime I click submit. I have tried
the code with and without the dashes but for some reason it still says
it's wrong.
Sent from my iPhone
On 16 Feb 2017, at 21:15, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
If possible, please use the SAME e-mail address when purchasing your
REG KEY. Otherwise, please let me know which of the 2 you prefer to use
w/ IYP.
r
On Thu, Feb 16, 2017 at 1:11 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Thanks for that.
Declan
Sent from my iPhone
On 16 Feb 2017, at 21:10, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Permit me to simply things. Your PILOT # is:
19846
r
On Thu, Feb 16, 2017 at 1:05 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
I haven't purchased the registration key yet, to do that it says I
need my pilot number and so I'm trying to get it from the profile
page but to get onto that page I have to login with my email and
password
Sent from my iPhone
On 16 Feb 2017, at 21:02, Robert Cezar <robert@xxxxxxxxxxxxxxx>
wrote:
Did you use the SAME e-mail address for your TRIAL as you did when
you purchased the REG KEY?
On Thu, Feb 16, 2017 at 12:59 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
When trying to login to the website, it says my email address is
incorrect but that's definitely the one I put in when I
registered, I've even got the emails that were sent to me
initially on the email address I'm trying to put in now so it has
to be right. Any idea why this could be?
Sent from my iPhone
On 16 Feb 2017, at 20:22, Robert Cezar <robert@xxxxxxxxxxxxxxx>
wrote:
Hi,
Login to the IYP Dashboard:
http://itsyourplane.com/html/login.asp
and select My Profile.
Your PILOT NUMBER is listed at the top of th page.
r
On Thu, Feb 16, 2017 at 12:18 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, to register I YP, how do I find my pilot number and then the
part where i enter my registration key
Thanks, Declan
Sent from my iPhone
On 16 Feb 2017, at 18:29, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Okay thanks, that makes sense, I'll make sure to register then.
Declan
Sent from my iPhone
On 16 Feb 2017, at 18:22, Robert Cezar
<robert@xxxxxxxxxxxxxxx> wrote:
Hello,
Only a REGISTERED version of IYP can operate in the BVI mode.
There's a minimum 30-day REFUND policy, so there's no reason
not to register IYP.
r
On Thu, Feb 16, 2017 at 10:19 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again. I'm currently on the trial version of Iyp and I've
managed to get in the air. At the minute, Mike performs the
takeoff but does not do all the things such as retract flaps
and gear as well as controlling airspeed. Is this just
because I'm currently on the trial version?
Sent from my iPhone
On 15 Feb 2017, at 22:38, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
No, I was talking about the flight file, which is distinct
from the flight plan file. The flight file has a .flt
extension, and are created by the save/load buttons on the
main “free flight,” screen. Those are the buttons you need
to use, not the save/load buttons on the flight plan screen.
Best,
Zack.
On Feb 15, 2017, at 2:35 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
So once I have created my flight plan, I have to save it,
and then click on load, select it and click okay again,
before clicking fly now. Before i was just creating my
flight plan and then clicking fly now straight away.
Declan Sent from my iPhone
On 15 Feb 2017, at 22:30, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
Either screen reader should be okay. YOu probably want to
start from a gate or ramp.
When you create and save your flight, are you then
loading it into the sim again? If you don’t do this, you
will still get your “no flight plan has been loaded,”
message. This is not actually true, as the “destination
work around,” I mentioned previously still lets you fly
and get distance information and so forth.
Best,
Zack.
On Feb 15, 2017, at 2:25 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
If I wanted to make a flight plan, and I think I'm
following the correct process on the flight deck doc, do
I need to select a runway or ramp to start from. That's
the only reason I can think of why it wouldn't be
working. If so, how do you do this as I'm struggling to
get this part to work in the filters area so it will
read with my screen reader. Just in case if one is
easier, I have jaws and NVDA.
Sent from my iPhone
On 15 Feb 2017, at 21:45, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
This is a bit buggy, or at least not as intuitive as it
could be. You've created a flight plan, but you haven't
saved an FSX flight. You can read about the process in
the flight deck document on the IYP site, or
alternatively just say, "Make the destination airport
'icao code'," which also seems to work. Personally, I
feel like flights are just a little too cluttered, and
I prefer this latter method.
Sent from my iPhone
On Feb 15, 2017, at 1:40 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again, sorry for all the questions. When I do a
flight plan, I select the aircraft and weather
conditions before going to flightplan and selecting my
start and end destinations, before selecting IFR and
low altitude airways. Then I click okay and save it.
Then I click fly now, but then Mike says no flight
plan has been loaded. I have also made the local
database to make sure that its working.
Sent from my iPhone
On 15 Feb 2017, at 20:32, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
If FSX isn’t paused, the “Q,” key is used to mute and
unmute sounds. Is it possible you hit this by
accident? Alternatively, P pauses or unpauses the
sim.
Best,
Zack.
On Feb 15, 2017, at 12:30 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, thanks so much for all your help, I'm now up and
runnning. I only have one problem at the moment, I
have no engine sound even though it was the engine
has started, thanks for any tips.
Sent from my iPhone
On 15 Feb 2017, at 19:43, Jason FayreBlind and Visually impaired Pilots mailinglist
<jfayre@xxxxxxxxx> wrote:
By default, flight simulator will pause when you
switch away from it. There's a setting under
General settings that is called something like
pause on task switch. You need to turn that off.
Sent from my iPhone
On Feb 15, 2017, at 2:12 PM, Declan WebsterBlind and Visually impaired Pilots mailinglist
<declan.webster44@xxxxxxxxx> wrote:
Hi, so I'm still having problems getting it's your
plane to work with my simulator. Here's what I'm
doing at the moment if someone could tell me what
I'm doing wrong. I launch it's your plane and then
launch the simulator. I click on free flight,
select the Cessna aircraft and then select my
starting point. I'm not doing a flight plan at
this point. Then I click fly now. I wait for the
scenery to fully load, and i usually get an engine
sound from the aircraft but I have been told by
someone cited that the plane is currently sitting
on the ground. I alt tab to it's your plane and
Mike starts talking, explaining about me being in
the trial version. Then he says it's your plane we
are ready to go, but when I try and give him any
commands, like do all checklists or open options
panel or something, nothing happens. I just get
the beats from speech recognition telling me it
didn't understand, even though I have configured
it already. Also, when I tab back to Microsoft
flight Sim, I no longer hear the engine sounds.
I'm just not sure where I'm going wrong really.
On 15 Feb 2017, at 17:58, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Hi Declan,
This is probably because you just picked the type
of aircraft you wanted, and not its location. The
default FSX flight starts with you already in the
air.
The solution is to go to the second Change
button, which lets you pick an airport to park
at. The search interface is a bit confusing, and
I usually just memorize the airport ID of the
place I want.
Hope this helps,
Zack.
On Feb 15, 2017, at 8:12 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi. I have just purchased Microsoft flight
simulator steam addition with Iyp. I have
completed all of the set up and I'm now looking
to try and complete my first flight. I was just
wondering if someone could help me with the
procedure, so far I have managed to only load
the aircraft in flight at which point I wipe he
asks me if I would like to do the descent
checklist. Could someone assist me with loading
the aircraft at a gate/ramp so I could run
through all of the checklist and complete the
flight properly.
Thanks for any help, Declan
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message
to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message
to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.