I believe the command is report traffic in sight. I could be wrong though
On Feb 16, 2017, at 5:52 PM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
So just a quick query, I was flying when the controller informed me of
traffic four miles at 12 o'clock. I said acknowledge but nothing happened so
I assumed it would be fine. About a minute later my Sim crushed and jaws said
I was back on the flight plan screen, but I couldn't explore the interface
with the keyboard , does this mean my aircraft crashed? It's your plane was
also responding to my command still but I have no sound of the aircraft.
Sent from my iPhone
On 16 Feb 2017, at 22:38, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
I am out of the office. Will be back in 2 hours.
R
On Feb 16, 2017 1:40 PM, "Declan Webster" <declan.webster44@xxxxxxxxx>
wrote:
Hi, I've managed to get my registration code, and by the way I'm using this
email address, but now when I enter the code it just wipes out what I've
written and says it's wrong everytime I click submit. I have tried the code
with and without the dashes but for some reason it still says it's wrong.
Sent from my iPhone
On 16 Feb 2017, at 21:15, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
If possible, please use the SAME e-mail address when purchasing your REG
KEY. Otherwise, please let me know which of the 2 you prefer to use w/ IYP.
r
On Thu, Feb 16, 2017 at 1:11 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Thanks for that.
Declan
Sent from my iPhone
On 16 Feb 2017, at 21:10, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Permit me to simply things. Your PILOT # is:
19846
r
On Thu, Feb 16, 2017 at 1:05 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
I haven't purchased the registration key yet, to do that it says I need
my pilot number and so I'm trying to get it from the profile page but
to get onto that page I have to login with my email and password
Sent from my iPhone
On 16 Feb 2017, at 21:02, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Did you use the SAME e-mail address for your TRIAL as you did when you
purchased the REG KEY?
On Thu, Feb 16, 2017 at 12:59 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
When trying to login to the website, it says my email address is
incorrect but that's definitely the one I put in when I registered,
I've even got the emails that were sent to me initially on the email
address I'm trying to put in now so it has to be right. Any idea why
this could be?
Sent from my iPhone
On 16 Feb 2017, at 20:22, Robert Cezar <robert@xxxxxxxxxxxxxxx>
wrote:
Hi,
Login to the IYP Dashboard:
http://itsyourplane.com/html/login.asp
and select My Profile.
Your PILOT NUMBER is listed at the top of th page.
r
On Thu, Feb 16, 2017 at 12:18 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, to register I YP, how do I find my pilot number and then the
part where i enter my registration key
Thanks, Declan
Sent from my iPhone
On 16 Feb 2017, at 18:29, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Okay thanks, that makes sense, I'll make sure to register then.
Declan
Sent from my iPhone
On 16 Feb 2017, at 18:22, Robert Cezar <robert@xxxxxxxxxxxxxxx>
wrote:
Hello,
Only a REGISTERED version of IYP can operate in the BVI mode.
There's a minimum 30-day REFUND policy, so there's no reason not
to register IYP.
r
On Thu, Feb 16, 2017 at 10:19 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again. I'm currently on the trial version of Iyp and I've
managed to get in the air. At the minute, Mike performs the
takeoff but does not do all the things such as retract flaps and
gear as well as controlling airspeed. Is this just because I'm
currently on the trial version?
Sent from my iPhone
On 15 Feb 2017, at 22:38, Zachary Kline <zkline@xxxxxxxxxxxxx>Blind and Visually impaired Pilots mailinglist
wrote:
Declan,
No, I was talking about the flight file, which is distinct
from the flight plan file. The flight file has a .flt
extension, and are created by the save/load buttons on the
main “free flight,” screen. Those are the buttons you need to
use, not the save/load buttons on the flight plan screen.
Best,
Zack.
On Feb 15, 2017, at 2:35 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
So once I have created my flight plan, I have to save it,
and then click on load, select it and click okay again,
before clicking fly now. Before i was just creating my flight
plan and then clicking fly now straight away.
Declan Sent from my iPhone
On 15 Feb 2017, at 22:30, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
Either screen reader should be okay. YOu probably want to
start from a gate or ramp.
When you create and save your flight, are you then loading
it into the sim again? If you don’t do this, you will still
get your “no flight plan has been loaded,” message. This is
not actually true, as the “destination work around,” I
mentioned previously still lets you fly and get distance
information and so forth.
Best,
Zack.
On Feb 15, 2017, at 2:25 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
If I wanted to make a flight plan, and I think I'm
following the correct process on the flight deck doc, do I
need to select a runway or ramp to start from. That's the
only reason I can think of why it wouldn't be working. If
so, how do you do this as I'm struggling to get this part
to work in the filters area so it will read with my screen
reader. Just in case if one is easier, I have jaws and NVDA.
Sent from my iPhone
On 15 Feb 2017, at 21:45, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
This is a bit buggy, or at least not as intuitive as it
could be. You've created a flight plan, but you haven't
saved an FSX flight. You can read about the process in the
flight deck document on the IYP site, or alternatively
just say, "Make the destination airport 'icao code',"
which also seems to work. Personally, I feel like flights
are just a little too cluttered, and I prefer this latter
method.
Sent from my iPhone
On Feb 15, 2017, at 1:40 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again, sorry for all the questions. When I do a flight
plan, I select the aircraft and weather conditions before
going to flightplan and selecting my start and end
destinations, before selecting IFR and low altitude
airways. Then I click okay and save it. Then I click fly
now, but then Mike says no flight plan has been loaded. I
have also made the local database to make sure that its
working.
Sent from my iPhone
On 15 Feb 2017, at 20:32, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
If FSX isn’t paused, the “Q,” key is used to mute and
unmute sounds. Is it possible you hit this by accident?
Alternatively, P pauses or unpauses the sim.
Best,
Zack.
On Feb 15, 2017, at 12:30 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, thanks so much for all your help, I'm now up and
runnning. I only have one problem at the moment, I have
no engine sound even though it was the engine has
started, thanks for any tips.
Sent from my iPhone
On 15 Feb 2017, at 19:43, Jason FayreBlind and Visually impaired Pilots mailinglist
<jfayre@xxxxxxxxx> wrote:
By default, flight simulator will pause when you
switch away from it. There's a setting under General
settings that is called something like pause on task
switch. You need to turn that off.
Sent from my iPhone
On Feb 15, 2017, at 2:12 PM, Declan WebsterBlind and Visually impaired Pilots mailinglist
<declan.webster44@xxxxxxxxx> wrote:
Hi, so I'm still having problems getting it's your
plane to work with my simulator. Here's what I'm
doing at the moment if someone could tell me what I'm
doing wrong. I launch it's your plane and then launch
the simulator. I click on free flight, select the
Cessna aircraft and then select my starting point.
I'm not doing a flight plan at this point. Then I
click fly now. I wait for the scenery to fully load,
and i usually get an engine sound from the aircraft
but I have been told by someone cited that the plane
is currently sitting on the ground. I alt tab to
it's your plane and Mike starts talking, explaining
about me being in the trial version. Then he says
it's your plane we are ready to go, but when I try
and give him any commands, like do all checklists or
open options panel or something, nothing happens. I
just get the beats from speech recognition telling me
it didn't understand, even though I have configured
it already. Also, when I tab back to Microsoft flight
Sim, I no longer hear the engine sounds. I'm just not
sure where I'm going wrong really.
On 15 Feb 2017, at 17:58, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Hi Declan,
This is probably because you just picked the type of
aircraft you wanted, and not its location. The
default FSX flight starts with you already in the
air.
The solution is to go to the second Change button,
which lets you pick an airport to park at. The
search interface is a bit confusing, and I usually
just memorize the airport ID of the place I want.
Hope this helps,
Zack.
On Feb 15, 2017, at 8:12 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi. I have just purchased Microsoft flight
simulator steam addition with Iyp. I have completed
all of the set up and I'm now looking to try and
complete my first flight. I was just wondering if
someone could help me with the procedure, so far I
have managed to only load the aircraft in flight at
which point I wipe he asks me if I would like to do
the descent checklist. Could someone assist me with
loading the aircraft at a gate/ramp so I could run
through all of the checklist and complete the
flight properly.
Thanks for any help, Declan
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.