If I wanted to make a flight plan, and I think I'm following the correct
process on the flight deck doc, do I need to select a runway or ramp to start
from. That's the only reason I can think of why it wouldn't be working. If so,
how do you do this as I'm struggling to get this part to work in the filters
area so it will read with my screen reader. Just in case if one is easier, I
have jaws and NVDA.
Sent from my iPhone
On 15 Feb 2017, at 21:45, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
This is a bit buggy, or at least not as intuitive as it could be. You've
created a flight plan, but you haven't saved an FSX flight. You can read
about the process in the flight deck document on the IYP site, or
alternatively just say, "Make the destination airport 'icao code'," which
also seems to work. Personally, I feel like flights are just a little too
cluttered, and I prefer this latter method.
Sent from my iPhone
On Feb 15, 2017, at 1:40 PM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Hi again, sorry for all the questions. When I do a flight plan, I select the
aircraft and weather conditions before going to flightplan and selecting my
start and end destinations, before selecting IFR and low altitude airways.
Then I click okay and save it. Then I click fly now, but then Mike says no
flight plan has been loaded. I have also made the local database to make
sure that its working.
Sent from my iPhone
On 15 Feb 2017, at 20:32, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
Declan,
If FSX isn’t paused, the “Q,” key is used to mute and unmute sounds. Is it
possible you hit this by accident? Alternatively, P pauses or unpauses the
sim.
Best,
Zack.
On Feb 15, 2017, at 12:30 PM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Hi, thanks so much for all your help, I'm now up and runnning. I only
have one problem at the moment, I have no engine sound even though it was
the engine has started, thanks for any tips.
Sent from my iPhone
On 15 Feb 2017, at 19:43, Jason Fayre <jfayre@xxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
By default, flight simulator will pause when you switch away from it.
There's a setting under General settings that is called something like
pause on task switch. You need to turn that off.
Sent from my iPhone
On Feb 15, 2017, at 2:12 PM, Declan Webster <declan.webster44@xxxxxxxxx>Blind and Visually impaired Pilots mailinglist
wrote:
Hi, so I'm still having problems getting it's your plane to work with my
simulator. Here's what I'm doing at the moment if someone could tell me
what I'm doing wrong. I launch it's your plane and then launch the
simulator. I click on free flight, select the Cessna aircraft and then
select my starting point. I'm not doing a flight plan at this point.
Then I click fly now. I wait for the scenery to fully load, and i
usually get an engine sound from the aircraft but I have been told by
someone cited that the plane is currently sitting on the ground. I alt
tab to it's your plane and Mike starts talking, explaining about me
being in the trial version. Then he says it's your plane we are ready to
go, but when I try and give him any commands, like do all checklists or
open options panel or something, nothing happens. I just get the beats
from speech recognition telling me it didn't understand, even though I
have configured it already. Also, when I tab back to Microsoft flight
Sim, I no longer hear the engine sounds. I'm just not sure where I'm
going wrong really.
On 15 Feb 2017, at 17:58, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:Blind and Visually impaired Pilots mailinglist
Hi Declan,
This is probably because you just picked the type of aircraft you
wanted, and not its location. The default FSX flight starts with you
already in the air.
The solution is to go to the second Change button, which lets you pick
an airport to park at. The search interface is a bit confusing, and I
usually just memorize the airport ID of the place I want.
Hope this helps,
Zack.
On Feb 15, 2017, at 8:12 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi. I have just purchased Microsoft flight simulator steam addition
with Iyp. I have completed all of the set up and I'm now looking to
try and complete my first flight. I was just wondering if someone
could help me with the procedure, so far I have managed to only load
the aircraft in flight at which point I wipe he asks me if I would
like to do the descent checklist. Could someone assist me with loading
the aircraft at a gate/ramp so I could run through all of the
checklist and complete the flight properly.
Thanks for any help, Declan
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject
of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the subject
of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of your
message.