Hello,
Only a REGISTERED version of IYP can operate in the BVI mode. There's a
minimum 30-day REFUND policy, so there's no reason not to register IYP.
r
On Thu, Feb 16, 2017 at 10:19 AM, Declan Webster <declan.webster44@xxxxxxxxx
wrote:
Hi again. I'm currently on the trial version of Iyp and I've managed to
get in the air. At the minute, Mike performs the takeoff but does not do
all the things such as retract flaps and gear as well as controlling
airspeed. Is this just because I'm currently on the trial version?
Sent from my iPhone
On 15 Feb 2017, at 22:38, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:flight plan file. The flight file has a .flt extension, and are created by
Declan,
No, I was talking about the flight file, which is distinct from the
the save/load buttons on the main “free flight,” screen. Those are the
buttons you need to use, not the save/load buttons on the flight plan
screen.
wrote:
Best,
Zack.
On Feb 15, 2017, at 2:35 PM, Declan Webster <declan.webster44@xxxxxxxxx>
click on load, select it and click okay again, before clicking fly now.
So once I have created my flight plan, I have to save it, and then
Before i was just creating my flight plan and then clicking fly now
straight away.
gate or ramp.Declan Sent from my iPhone
On 15 Feb 2017, at 22:30, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:
Declan,
Either screen reader should be okay. YOu probably want to start from a
sim again? If you don’t do this, you will still get your “no flight plan
When you create and save your flight, are you then loading it into the
has been loaded,” message. This is not actually true, as the “destination
work around,” I mentioned previously still lets you fly and get distance
information and so forth.
declan.webster44@xxxxxxxxx> wrote:
Best,
Zack.
On Feb 15, 2017, at 2:25 PM, Declan Webster <
correct process on the flight deck doc, do I need to select a runway or
If I wanted to make a flight plan, and I think I'm following the
ramp to start from. That's the only reason I can think of why it wouldn't
be working. If so, how do you do this as I'm struggling to get this part to
work in the filters area so it will read with my screen reader. Just in
case if one is easier, I have jaws and NVDA.
wrote:
Sent from my iPhone
On 15 Feb 2017, at 21:45, Zachary Kline <zkline@xxxxxxxxxxxxx>
You've created a flight plan, but you haven't saved an FSX flight. You can
This is a bit buggy, or at least not as intuitive as it could be.
read about the process in the flight deck document on the IYP site, or
alternatively just say, "Make the destination airport 'icao code'," which
also seems to work. Personally, I feel like flights are just a little too
cluttered, and I prefer this latter method.
declan.webster44@xxxxxxxxx> wrote:
Sent from my iPhone
On Feb 15, 2017, at 1:40 PM, Declan Webster <
select the aircraft and weather conditions before going to flightplan and
Hi again, sorry for all the questions. When I do a flight plan, I
selecting my start and end destinations, before selecting IFR and low
altitude airways. Then I click okay and save it. Then I click fly now, but
then Mike says no flight plan has been loaded. I have also made the local
database to make sure that its working.
wrote:
Sent from my iPhone
On 15 Feb 2017, at 20:32, Zachary Kline <zkline@xxxxxxxxxxxxx>
sounds. Is it possible you hit this by accident? Alternatively, P pauses
Declan,
If FSX isn’t paused, the “Q,” key is used to mute and unmute
or unpauses the sim.
declan.webster44@xxxxxxxxx> wrote:
Best,
Zack.
On Feb 15, 2017, at 12:30 PM, Declan Webster <
only have one problem at the moment, I have no engine sound even though it
Hi, thanks so much for all your help, I'm now up and runnning. I
was the engine has started, thanks for any tips.
from it. There's a setting under General settings that is called something
Sent from my iPhone
On 15 Feb 2017, at 19:43, Jason Fayre <jfayre@xxxxxxxxx> wrote:
By default, flight simulator will pause when you switch away
like pause on task switch. You need to turn that off.
declan.webster44@xxxxxxxxx> wrote:
Sent from my iPhone
On Feb 15, 2017, at 2:12 PM, Declan Webster <
work with my simulator. Here's what I'm doing at the moment if someone
Hi, so I'm still having problems getting it's your plane to
could tell me what I'm doing wrong. I launch it's your plane and then
launch the simulator. I click on free flight, select the Cessna aircraft
and then select my starting point. I'm not doing a flight plan at this
point. Then I click fly now. I wait for the scenery to fully load, and i
usually get an engine sound from the aircraft but I have been told by
someone cited that the plane is currently sitting on the ground. I alt tab
to it's your plane and Mike starts talking, explaining about me being in
the trial version. Then he says it's your plane we are ready to go, but
when I try and give him any commands, like do all checklists or open
options panel or something, nothing happens. I just get the beats from
speech recognition telling me it didn't understand, even though I have
configured it already. Also, when I tab back to Microsoft flight Sim, I no
longer hear the engine sounds. I'm just not sure where I'm going wrong
really.
wrote:
On 15 Feb 2017, at 17:58, Zachary Kline <zkline@xxxxxxxxxxxxx>
you wanted, and not its location. The default FSX flight starts with you
Hi Declan,
This is probably because you just picked the type of aircraft
already in the air.
you pick an airport to park at. The search interface is a bit confusing,
The solution is to go to the second Change button, which lets
and I usually just memorize the airport ID of the place I want.
declan.webster44@xxxxxxxxx> wrote:Hope this helps,
Zack.
On Feb 15, 2017, at 8:12 AM, Declan Webster <
addition with Iyp. I have completed all of the set up and I'm now looking
Hi. I have just purchased Microsoft flight simulator steam
to try and complete my first flight. I was just wondering if someone could
help me with the procedure, so far I have managed to only load the aircraft
in flight at which point I wipe he asks me if I would like to do the
descent checklist. Could someone assist me with loading the aircraft at a
gate/ramp so I could run through all of the checklist and complete the
flight properly.
in the subject of your message.Thanks for any help, Declan
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
in the subject of your message.Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
the subject of your message.Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
the subject of your message.Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
the subject of your message.Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject
subject of your message.Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
of your message.For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
For other options such as digest, send a message toyour message.
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject of
your message.
