Thanks for that.
Declan
Sent from my iPhone
On 16 Feb 2017, at 21:10, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Permit me to simply things. Your PILOT # is:
19846
r
On Thu, Feb 16, 2017 at 1:05 PM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
I haven't purchased the registration key yet, to do that it says I need my
pilot number and so I'm trying to get it from the profile page but to get
onto that page I have to login with my email and password
Sent from my iPhone
On 16 Feb 2017, at 21:02, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Did you use the SAME e-mail address for your TRIAL as you did when you
purchased the REG KEY?
On Thu, Feb 16, 2017 at 12:59 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
When trying to login to the website, it says my email address is incorrect
but that's definitely the one I put in when I registered, I've even got
the emails that were sent to me initially on the email address I'm trying
to put in now so it has to be right. Any idea why this could be?
Sent from my iPhone
On 16 Feb 2017, at 20:22, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Hi,
Login to the IYP Dashboard:
http://itsyourplane.com/html/login.asp
and select My Profile.
Your PILOT NUMBER is listed at the top of th page.
r
On Thu, Feb 16, 2017 at 12:18 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, to register I YP, how do I find my pilot number and then the part
where i enter my registration key
Thanks, Declan
Sent from my iPhone
On 16 Feb 2017, at 18:29, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Okay thanks, that makes sense, I'll make sure to register then.
Declan
Sent from my iPhone
On 16 Feb 2017, at 18:22, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Hello,
Only a REGISTERED version of IYP can operate in the BVI mode. There's
a minimum 30-day REFUND policy, so there's no reason not to register
IYP.
r
On Thu, Feb 16, 2017 at 10:19 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again. I'm currently on the trial version of Iyp and I've managed
to get in the air. At the minute, Mike performs the takeoff but does
not do all the things such as retract flaps and gear as well as
controlling airspeed. Is this just because I'm currently on the trial
version?
Sent from my iPhone
On 15 Feb 2017, at 22:38, Zachary Kline <zkline@xxxxxxxxxxxxx>Blind and Visually impaired Pilots mailinglist
wrote:
Declan,
No, I was talking about the flight file, which is distinct from the
flight plan file. The flight file has a .flt extension, and are
created by the save/load buttons on the main “free flight,” screen.
Those are the buttons you need to use, not the save/load buttons on
the flight plan screen.
Best,
Zack.
On Feb 15, 2017, at 2:35 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
So once I have created my flight plan, I have to save it, and
then click on load, select it and click okay again, before
clicking fly now. Before i was just creating my flight plan and
then clicking fly now straight away.
Declan Sent from my iPhone
On 15 Feb 2017, at 22:30, Zachary Kline <zkline@xxxxxxxxxxxxx>Blind and Visually impaired Pilots mailinglist
wrote:
Declan,
Either screen reader should be okay. YOu probably want to start
from a gate or ramp.
When you create and save your flight, are you then loading it
into the sim again? If you don’t do this, you will still get your
“no flight plan has been loaded,” message. This is not actually
true, as the “destination work around,” I mentioned previously
still lets you fly and get distance information and so forth.
Best,
Zack.
On Feb 15, 2017, at 2:25 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
If I wanted to make a flight plan, and I think I'm following the
correct process on the flight deck doc, do I need to select a
runway or ramp to start from. That's the only reason I can think
of why it wouldn't be working. If so, how do you do this as I'm
struggling to get this part to work in the filters area so it
will read with my screen reader. Just in case if one is easier,
I have jaws and NVDA.
Sent from my iPhone
On 15 Feb 2017, at 21:45, Zachary Kline <zkline@xxxxxxxxxxxxx>Blind and Visually impaired Pilots mailinglist
wrote:
This is a bit buggy, or at least not as intuitive as it could
be. You've created a flight plan, but you haven't saved an FSX
flight. You can read about the process in the flight deck
document on the IYP site, or alternatively just say, "Make the
destination airport 'icao code'," which also seems to work.
Personally, I feel like flights are just a little too
cluttered, and I prefer this latter method.
Sent from my iPhone
On Feb 15, 2017, at 1:40 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again, sorry for all the questions. When I do a flight
plan, I select the aircraft and weather conditions before
going to flightplan and selecting my start and end
destinations, before selecting IFR and low altitude airways.
Then I click okay and save it. Then I click fly now, but then
Mike says no flight plan has been loaded. I have also made the
local database to make sure that its working.
Sent from my iPhone
On 15 Feb 2017, at 20:32, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
If FSX isn’t paused, the “Q,” key is used to mute and unmute
sounds. Is it possible you hit this by accident?
Alternatively, P pauses or unpauses the sim.
Best,
Zack.
On Feb 15, 2017, at 12:30 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, thanks so much for all your help, I'm now up and
runnning. I only have one problem at the moment, I have no
engine sound even though it was the engine has started,
thanks for any tips.
Sent from my iPhone
On 15 Feb 2017, at 19:43, Jason Fayre <jfayre@xxxxxxxxx>Blind and Visually impaired Pilots mailinglist
wrote:
By default, flight simulator will pause when you switch
away from it. There's a setting under General settings that
is called something like pause on task switch. You need to
turn that off.
Sent from my iPhone
On Feb 15, 2017, at 2:12 PM, Declan WebsterBlind and Visually impaired Pilots mailinglist
<declan.webster44@xxxxxxxxx> wrote:
Hi, so I'm still having problems getting it's your plane
to work with my simulator. Here's what I'm doing at the
moment if someone could tell me what I'm doing wrong. I
launch it's your plane and then launch the simulator. I
click on free flight, select the Cessna aircraft and then
select my starting point. I'm not doing a flight plan at
this point. Then I click fly now. I wait for the scenery
to fully load, and i usually get an engine sound from the
aircraft but I have been told by someone cited that the
plane is currently sitting on the ground. I alt tab to
it's your plane and Mike starts talking, explaining about
me being in the trial version. Then he says it's your
plane we are ready to go, but when I try and give him any
commands, like do all checklists or open options panel or
something, nothing happens. I just get the beats from
speech recognition telling me it didn't understand, even
though I have configured it already. Also, when I tab back
to Microsoft flight Sim, I no longer hear the engine
sounds. I'm just not sure where I'm going wrong really.
On 15 Feb 2017, at 17:58, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Hi Declan,
This is probably because you just picked the type of
aircraft you wanted, and not its location. The default
FSX flight starts with you already in the air.
The solution is to go to the second Change button, which
lets you pick an airport to park at. The search interface
is a bit confusing, and I usually just memorize the
airport ID of the place I want.
Hope this helps,
Zack.
On Feb 15, 2017, at 8:12 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi. I have just purchased Microsoft flight simulator
steam addition with Iyp. I have completed all of the set
up and I'm now looking to try and complete my first
flight. I was just wondering if someone could help me
with the procedure, so far I have managed to only load
the aircraft in flight at which point I wipe he asks me
if I would like to do the descent checklist. Could
someone assist me with loading the aircraft at a
gate/ramp so I could run through all of the checklist
and complete the flight properly.
Thanks for any help, Declan
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe
in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in
the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the
subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word unsubscribe in the
subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in the subject
of your message.
