Myron,
thank you for the mountain of good advice.
Our local race shop usually keeps me from doing really dumb stuff with my cars.
John Feng
On May 17, 2022, at 4:08 PM, Myron Boyajian <dmarc-noreply@xxxxxxxxxxxxx>=========Thanks for being a subscriber to Bobsy Talk email. Be sure to also
wrote:
Hi John,
Unless there’s evidence of metal fatigue ( bulges, cracks) those brakes
should be OK.
If necessary reline the bores ( see White Post Restorations). On two of my
Airhearts, the threaded holes didn’t look good, so an ace machinist friend
put them in his Bridgeport and drilled and tapped them for Helicoils. Worked
perfectly and raced them hard for years.
I’m sure you have experience, but here are some suggestions based on my 30+
years of racing. Lay out your brake lines (tubing) carefully and used Avdel
or rubber-lined clamps or pieces of neoprene to avoid any metal-to-metal
contact. Hoses- I always used SS braided, Teflon-lined flex hoses-they are
strong and don’t bulge under pressure. If you have the same size brakes and
same rotor diameter front and back, use a balance bar to bias your braking so
the fronts lock up before the rears to maintain directional stability. Very
important when it rains! Oh yeah, when it rained, I disconnected my rear
sway bar to reduce rear roll stiffness.
I found after adjusting brake balance bar, I changed to a 5/8” dia. front
master cylinder and a 3/4” dia. rear master cylinder, and then was able to.
almost center-up the brake balance bar.
DON’T use silicone brake fluid. It’s safe for paint on collector cars, but
quite compressible resulting in a “long” pedal in your racing. Don’t ask me
how I know! I used Ford heavy—duty truck brake fluid for years. It has
high boiling point, not compressible and performs like those expensive
exotic fluids, and is compatible with brake seals and o- rings. Get it at
the local Ford dealer. I apologize if I am repeating stuff you already know,
but I found that more prep-time back in the garage meant more fun-time on the
track. I raced H-Mod and then DSR for years, was DSR class champ in the
Midwest Council in 1984 and had a lot of fun racing, so I did a something
right.
I hope that you have a great time racing, too. By the way, if you want to
see my old Quasar, I think it’s still on the web- Google: Mike Boyajian. DSR
For Sale
Enjoy!
Mike Boyajian
On May 17, 2022, at 1:41 PM, J Feng <xkfeng7@xxxxxxxxx> wro
Thanks for the info and suggestions.
While a 175x1 is probably adequate in the rear for an SR3of this Beach from
30 years ago clearly show 175x2’s on the rear. The original literature
suggests same sized brakes fire and aft. So, 175x2’s in the rear is original
as far as I know.
On a whim I searched Facebook and found a fellow with a good selection of
old airheart calipers, including a 175x2 and 175x1’s. But they are pretty
expensive, similar to brand new new Girling calipers BEFORE factoring in
resleeve/rebuild costs.
Finally, Ron Mong mentioned to me that using old and unknown brake calipers
is not always the smart choice on a race car. He is a professional so I
have a request into SVRA to see if they will allow a new vintage style
Girling caliper with the same pad area.
How many of you are racing on 50 year old brake calipers?
John
J Feng
On May 17, 2022, at 11:12 AM, Tom Taff <dmarc-noreply@xxxxxxxxxxxxx> wrote:John, Just as Mike suggested, Speedway has pads listed in their catalog.
On May 16, 2022, at 9:59 PM, Myron Boyajian ("mboyajian")Hi John,
<dmarc-noreply@xxxxxxxxxxxxx> wrote:
175X2 Airhearts were used on the front of my Bobsy (clone) and my Quasar
back in the day. Airheart 175X1s were used in back. Airhearts were used
a l
=========Thanks for being a subscriber to Bobsy Talk email. Be sure to also
check the regular Bobsy website from time-to-time at www.BobsyRegistry.com.
www.freelists.org/archive/bobsy_talk/. >>To unsubscribe to Bobsy Talk go toTo see an archive of past Bobsy Talk emails at
www.freelists.org/list/bobsy_talk and change box to "unsubscribe."
=========
www.freelists.org/archive/bobsy_talk/. >>To unsubscribe to Bobsy Talk go toTo see an archive of past Bobsy Talk emails at