Hi, Scott, how do I put that tilde you mention over the A? Do I turn on the thumb keys and write an alt key with a number that represents the A tilde? I know I have a tilde on the computer keyboard but am unsure how to make that A tilde look good. Any advice I can get will be appreciated. I think I have a message about circumflexes using the Control key and something else. Thanks for the info Scott. You see, if I were writing Braille, (not the Portuguese Braille, but standard Grade 2 Braille) Any accented letter is marked with a dot 4 in a Braille cell. For example, if I were writing "puree" (which in French would have an E accent aigu over the first E), I would write "p-u-r-dot 4-e-e". So also, if I were writing Sao Paulo in Braille, I'd write "dot 6 (capital letter sign) s-dot 4-a-o dot 6-p-a-u-l-o". Regards, Kim Friedman. -----Original Message----- From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Scott Rains Sent: Monday, August 29, 2011 1:59 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] Re: Advice requested Kim, InPortuguese you will most often find the tilde over a before o. For example, San Franciso in English and Spanish is Sao - with a tilde over the a - Francisco in Portuguese. Mano is Spanish is mao - with a tilde over the a - in Portuguese. Circumflex will most often be over an o occurring as the only vowel in a syllable. It would be very rare to find umlauts in Portuguese. Even in the Linguistics Department in Brazil we just ignored the umlaut in the word lingüística . Scott On 8/29/11 1:48 PM, "Kim Friedman" <kimfri11@xxxxxxxxxxx> wrote: >Hi, Bob, the problem is that I don't know what symbol is used in the >print, so I can't know the appropriate accent mark to use. I don't know >if I should use a circumflex mark on the A, a grave, an acute accent, >or an umlaut. (I'm pretty sure the umlaut isn't what I want.) Regards, >Kim Friedman. > >-----Original Message----- >From: bksvol-discuss-bounce@xxxxxxxxxxxxx >[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Bob W >Sent: Monday, August 29, 2011 1:41 PM >To: bksvol-discuss@xxxxxxxxxxxxx >Subject: [bksvol-discuss] Re: Advice requested > > >What software/hardware are you using? > >If in some way you are using jaws (i.e. jaws with word) then you can >press >insert+4 (that's four on the numbers row) and you will get a list of >characters to choose from. > >Press enter on the character that meets your needs. > >The three a characters you get are: á Á and æ. > >Hope this helps. > >p.s. even if you're using a program like kurzweil or openbook to proof >with, there are ways to get these characters into those programs. Just >let us know. > >Bob >----- Original Message ----- >From: "Kim Friedman" <kimfri11@xxxxxxxxxxx> >To: <bksvol-discuss@xxxxxxxxxxxxx> >Sent: Monday, August 29, 2011 3:13 PM >Subject: [bksvol-discuss] Advice requested > > >Hi, I'm proofreading a science fiction book. I'm reading the second >story in the anthology. Part of the story takes place in Brazil. >There's a discussion of Sao Paulo. The advice I need is how to put in >the correct accent mark for the A in Sao Paulo (Paulo doesn't use an >accent mark. I know how to write it in Braille, but I don't know which >ASCII character to use for the A in Sao. Please write me back as I wish >this to look right. Many thanks for the help. Regards, Kim Friedman. > > To unsubscribe from this list send a blank Email to >bksvol-discuss-request@xxxxxxxxxxxxx >put the word 'unsubscribe' by itself in the subject line. To get a >list of available commands, put the word 'help' by itself in the >subject line. > > To unsubscribe from this list send a blank Email to >bksvol-discuss-request@xxxxxxxxxxxxx >put the word 'unsubscribe' by itself in the subject line. To get a >list of available commands, put the word 'help' by itself in the >subject line. > > To unsubscribe from this list send a blank Email to >bksvol-discuss-request@xxxxxxxxxxxxx >put the word 'unsubscribe' by itself in the subject line. To get a >list of available commands, put the word 'help' by itself in the >subject line. > > To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line. To unsubscribe from this list send a blank Email to bksvol-discuss-request@xxxxxxxxxxxxx put the word 'unsubscribe' by itself in the subject line. To get a list of available commands, put the word 'help' by itself in the subject line.