Here is a photo of the lamp and sensors. You can zoom in and get a better look. Barry -----Original Message----- From: analogorgans-bounce@xxxxxxxxxxxxx [mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of bh Sent: Monday, May 07, 2007 8:30 PM To: analogorgans@xxxxxxxxxxxxx Subject: [analogorgans] Re: SOS "Expression Pedal not working" Hi Charles, I appreciate the info on the bulb. From your description of the No. 19 bulb used on the music rack light, I think that one is too big. However, your description of the 24CS seems to be the lamp I am looking for. It's clear, cylinder/cone shaped with two thin wires coming out the bottom end. I will take a photo of it and email it to you. Barry PS: I am not sure, but could this be the part number for the lamp: 1460-026? ======================= -----Original Message----- From: analogorgans-bounce@xxxxxxxxxxxxx [mailto:analogorgans-bounce@xxxxxxxxxxxxx] On Behalf Of Charles Strack Sent: Monday, May 07, 2007 7:19 PM To: analogorgans@xxxxxxxxxxxxx Subject: [analogorgans] Re: SOS "Expression Pedal not working" Hi, Barry, I don't have a part number cross reference, but will look through my various manuals tonight & see if I can identify the part number on one of the schematics. By the way, if it is a No. 19 bulb, it's the same kind they use on the music rack light. If it is a no. 19, then it's probably got socket clips. The no. 19 is globe shaped bulb with 2 pins coming out of the bottom. The 24CS is a cylinder shaped bulb, with wires (somewhat fragile looking) coming out of its bottom. It would be soldered into the board. Charlie
Attachment:
Rodgers Organ OUTPUT Preamp 008.jpg
Description: JPEG image
