[amayausers] Re: backing question
- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 14 Dec 2005 10:38:20 -0500
Hi Luann-
we use 3 oz. cutaway on the back-it is softer than tear away.
also a layer of solvy on the front-holds the lettering better for detail. I
also think the solvy tends to let the needles 'slide' easier-we notice a lot
less thread or bobbin breaks. I think our MT is 8 on most of the sweats-7 on
the 6 oz., 10 on the premium 11+ oz-the real 'high loft' sweater jackets.
Roland
From: "image embriodery" <imageembroidery@xxxxxxxxxx>
Reply-To: amayausers@xxxxxxxxxxxxx
Date: Wed, 14 Dec 2005 10:11:19 -0500
To: <amayausers@xxxxxxxxxxxxx>
Subject: [amayausers] backing question
Good mroning all!
Quick question. I just finished doing set up on a design for a sweatshirt
front.
Finished size is 8 x 9 inches.
Mostly text...1/2 inch tall Athlethic Flair.
Two states...Solid fills about 2 inches high.
What would anyone suggest for backing? Cut away or tear away?
Thanks..
LuAnn @ Image Embroidery
Because Your "Image" Matters
Other related posts:
