[amayausers.com] Re: Sequins accessory not responding
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 5 May 2008 18:40:51 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/382/2.html#000018
Dee,
Here is some additional information that is included in the installment
procedures for a sequin device......this is the " AOS " 7.00.056
version.....not related to the Design Shop version....
"##########################
Make sure Amaya AOS version 7.00.056, XT RSA 3.74 or later is loaded
Reconnect the power cord and network cable and air supply and verify the sequin
head is in the up position and the lock is engaged( if one is there) and apply
power to the machine
After machine has initialized, go to the tools menu and select set sequin
options
and set the option to one turn the machine off and restart and test sew the
machine out"
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
