You need to do this from the Creative's menu. (It's the third of three options).
I had already added Brian's scripts before I did this so don't know for certain how well it works without them. I guess though that it's reasonably standard and maybe there wasn't any scripting done for this part of the programme.
To check battery status and free space, press F11 in Creative Media Lite. Again you will need Brian's scripts to get this information via JAWS.
HTH:Sorry if I don't reply further tonight but have had surgery today and pain is becoming pretty bad so I'm going to have to give the computer a wide birth this evening! <Smiles>
-- Carol carol.pearson@xxxxxxxxxxxx----- Original Message ----- From: "Christine Weetman" <goatmum@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, June 14, 2007 4:16 PM Subject: [access-uk] Re: Switching on the Zen Stone
How do I check battery status and register the Stone Carol? Thanks, Christine W. ----- Original Message ----- From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, June 14, 2007 2:34 PM Subject: [access-uk] Re: Switching on the Zen StoneAdrian, Battery meter is about all I've used it for and also to register the Zen Stone, which apparently entitles us to upgrades. -- Carol carol.pearson@xxxxxxxxxxxx ----- Original Message ----- From: "Adrian Higginbotham" <adrian.higginbotham@xxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, June 14, 2007 11:44 AM Subject: [access-uk] Re: Switching on the Zen Stone> Carol - as a matter of interest what have you needed to use the > creative> software for? So far I haven't bothered to install it as get along just > fine with windows explorer and audible manager to load the stone. > > Battery meter? > Any other advantages? > > Adrian Higginbotham > > > Accessibility content manager > > British Educational Communications and Technology Agency - BECTA > Tel: Direct dial 024 7679 7333 - Becta switchboard 02476-416994. > > Email: Adrian.Higginbotham@xxxxxxxxxxxx > Web: http://www.becta.org.uk/ > BECTA, Millburn Hill Road, Science Park, Coventry, CV4 7JJ > > > -----Original Message-----> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On > Behalf> Of Carol Pearson > Sent: 13 June 2007 21:08 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: Switching on the Zen Stone > > Amanda, > > I have found this isn't an issue if you're using Windows Explorer but, > when using the Creative software, it's been a bit picky. I've found I > need to open Creative, then plug in the Zen Stone. > > If you're just using Windows Explorer, you should probably get a > dialogue up, after plugging in the Zen Stone, to indicate a drive and > ask whether you want to play files etc. . . .. > > Hope this helps a bit. > > -- > Carol > carol.pearson@xxxxxxxxxxxx > > > ----- Original Message ----- > From: "Amanda Burt" <amanda.burt1@xxxxxxxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Wednesday, June 13, 2007 8:33 PM > Subject: [access-uk] Re: Switching on the Zen Stone > > >>I also have a problem with my Zenstone. When i conect it up to the >>computer and try to transfer files, it tells me that the player is not >>deteceted. Does anyone know what that could be? >> >> Thanks Amanda. >> ----- Original Message ----- >> From: "Steve Nutt" <steve@xxxxxxxxxxxxxx> >> To: <access-uk@xxxxxxxxxxxxx> >> Sent: Wednesday, June 13, 2007 8:28 AM >> Subject: [access-uk] Re: Switching on the Zen Stone >> >> >>> Hi Mark, >>> >>> I just hold it in for about three seconds, much like turning on a > mobile >>> phone, and it seems to work for me every time. >>> >>> All the best >>> >>> Steve >>> >>> -----Original Message----- >>> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On > Behalf >>> Of >>> Mark Threadgold >>> Sent: 13 June 2007 08:20 >>> To: accessuk list >>> Subject: [access-uk] Switching on the Zen Stone >>> >>> Is there a particular way to turn on the Zen Stone please? I press > and >>> hold >>> the centre button and fiddle about but it takes over half a minute to > get >>> it >>> to start playing. Surely there is a simple way to do this? >>> >>> Mark Threadgold >>> >>> Of all the things I have ever lost, the one I miss most is my mind... >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >>> >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >>> >> >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
