[access-uk] Re: Switching on the Zen Stone
- From: "Christine Weetman" <goatmum@xxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 14 Jun 2007 16:16:17 +0100
How do I check battery status and register the Stone Carol? Thanks,
Christine W.
----- Original Message -----
From: "Carol Pearson" <carol.pearson@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, June 14, 2007 2:34 PM
Subject: [access-uk] Re: Switching on the Zen Stone
> Adrian,
>
> Battery meter is about all I've used it for and also to register the Zen
> Stone, which apparently entitles us to upgrades.
>
> --
> Carol
> carol.pearson@xxxxxxxxxxxx
>
>
> ----- Original Message -----
> From: "Adrian Higginbotham" <adrian.higginbotham@xxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Thursday, June 14, 2007 11:44 AM
> Subject: [access-uk] Re: Switching on the Zen Stone
>
>
> > Carol - as a matter of interest what have you needed to use the creative
> > software for? So far I haven't bothered to install it as get along just
> > fine with windows explorer and audible manager to load the stone.
> >
> > Battery meter?
> > Any other advantages?
> >
> > Adrian Higginbotham
> >
> >
> > Accessibility content manager
> >
> > British Educational Communications and Technology Agency - BECTA
> > Tel: Direct dial 024 7679 7333 - Becta switchboard 02476-416994.
> >
> > Email: Adrian.Higginbotham@xxxxxxxxxxxx
> > Web: http://www.becta.org.uk/
> > BECTA, Millburn Hill Road, Science Park, Coventry, CV4 7JJ
> >
> >
> > -----Original Message-----
> > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
> > Of Carol Pearson
> > Sent: 13 June 2007 21:08
> > To: access-uk@xxxxxxxxxxxxx
> > Subject: [access-uk] Re: Switching on the Zen Stone
> >
> > Amanda,
> >
> > I have found this isn't an issue if you're using Windows Explorer but,
> > when using the Creative software, it's been a bit picky. I've found I
> > need to open Creative, then plug in the Zen Stone.
> >
> > If you're just using Windows Explorer, you should probably get a
> > dialogue up, after plugging in the Zen Stone, to indicate a drive and
> > ask whether you want to play files etc. . . ..
> >
> > Hope this helps a bit.
> >
> > --
> > Carol
> > carol.pearson@xxxxxxxxxxxx
> >
> >
> > ----- Original Message -----
> > From: "Amanda Burt" <amanda.burt1@xxxxxxxxxxxxxx>
> > To: <access-uk@xxxxxxxxxxxxx>
> > Sent: Wednesday, June 13, 2007 8:33 PM
> > Subject: [access-uk] Re: Switching on the Zen Stone
> >
> >
> >>I also have a problem with my Zenstone. When i conect it up to the
> >>computer and try to transfer files, it tells me that the player is not
> >>deteceted. Does anyone know what that could be?
> >>
> >> Thanks Amanda.
> >> ----- Original Message -----
> >> From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
> >> To: <access-uk@xxxxxxxxxxxxx>
> >> Sent: Wednesday, June 13, 2007 8:28 AM
> >> Subject: [access-uk] Re: Switching on the Zen Stone
> >>
> >>
> >>> Hi Mark,
> >>>
> >>> I just hold it in for about three seconds, much like turning on a
> > mobile
> >>> phone, and it seems to work for me every time.
> >>>
> >>> All the best
> >>>
> >>> Steve
> >>>
> >>> -----Original Message-----
> >>> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
> > Behalf
> >>> Of
> >>> Mark Threadgold
> >>> Sent: 13 June 2007 08:20
> >>> To: accessuk list
> >>> Subject: [access-uk] Switching on the Zen Stone
> >>>
> >>> Is there a particular way to turn on the Zen Stone please? I press
> > and
> >>> hold
> >>> the centre button and fiddle about but it takes over half a minute to
> > get
> >>> it
> >>> to start playing. Surely there is a simple way to do this?
> >>>
> >>> Mark Threadgold
> >>>
> >>> Of all the things I have ever lost, the one I miss most is my mind...
> >>>
> >>> ** To leave the list, click on the immediately-following link:-
> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >>> ** If this link doesn't work then send a message to:
> >>> ** access-uk-request@xxxxxxxxxxxxx
> >>> ** and in the Subject line type
> >>> ** unsubscribe
> >>> ** For other list commands such as vacation mode, click on the
> >>> ** immediately-following link:-
> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> >>> ** or send a message, to
> >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>
> >>>
> >>>
> >>> ** To leave the list, click on the immediately-following link:-
> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >>> ** If this link doesn't work then send a message to:
> >>> ** access-uk-request@xxxxxxxxxxxxx
> >>> ** and in the Subject line type
> >>> ** unsubscribe
> >>> ** For other list commands such as vacation mode, click on the
> >>> ** immediately-following link:-
> >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> >>> ** or send a message, to
> >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>>
> >>>
> >>
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** access-uk-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
