Carol - as a matter of interest what have you needed to use the creative
software for? So far I haven't bothered to install it as get along just
fine with windows explorer and audible manager to load the stone.
Battery meter?
Any other advantages?
Adrian Higginbotham
Accessibility content manager
British Educational Communications and Technology Agency - BECTA
Tel: Direct dial 024 7679 7333 - Becta switchboard 02476-416994.
Email: Adrian.Higginbotham@xxxxxxxxxxxx
Web: http://www.becta.org.uk/
BECTA, Millburn Hill Road, Science Park, Coventry, CV4 7JJ
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of Carol Pearson
Sent: 13 June 2007 21:08
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Switching on the Zen Stone
Amanda,
I have found this isn't an issue if you're using Windows Explorer but,
when using the Creative software, it's been a bit picky. I've found I
need to open Creative, then plug in the Zen Stone.
If you're just using Windows Explorer, you should probably get a
dialogue up, after plugging in the Zen Stone, to indicate a drive and
ask whether you want to play files etc. . . ..
Hope this helps a bit.
--
Carol
carol.pearson@xxxxxxxxxxxx
----- Original Message -----
From: "Amanda Burt" <amanda.burt1@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, June 13, 2007 8:33 PM
Subject: [access-uk] Re: Switching on the Zen Stone
I also have a problem with my Zenstone. When i conect it up to the
computer and try to transfer files, it tells me that the player is not
deteceted. Does anyone know what that could be?
Thanks Amanda.
----- Original Message -----
From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, June 13, 2007 8:28 AM
Subject: [access-uk] Re: Switching on the Zen Stone
Hi Mark,
I just hold it in for about three seconds, much like turning on a
mobile
phone, and it seems to work for me every time.
All the best
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf
Of
Mark Threadgold
Sent: 13 June 2007 08:20
To: accessuk list
Subject: [access-uk] Switching on the Zen Stone
Is there a particular way to turn on the Zen Stone please? I press
and
hold
the centre button and fiddle about but it takes over half a minute to
get
it
to start playing. Surely there is a simple way to do this?
Mark Threadgold
Of all the things I have ever lost, the one I miss most is my mind...
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
