[access-uk] Re: Switching on the Zen Stone
- From: "Adrian Higginbotham" <adrian.higginbotham@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 14 Jun 2007 12:00:56 +0100
yep space is interesting I filled mine up last night and couldonly
squeeze about 918 meg on to it. hardly a problem as it's a lot of hours
of audio but a little frustrating in that I had been careful to compile
just short of a full gig of material and then had to skim through the
files which had copied across so as to establish which had not.
does the creative software give the same capacity info as windows
explorer properties has anyone checked or is it more accurate.
Adrian Higginbotham
Accessibility content manager
British Educational Communications and Technology Agency - BECTA
Tel: Direct dial 024 7679 7333 - Becta switchboard 02476-416994.
Email: Adrian.Higginbotham@xxxxxxxxxxxx
Web: http://www.becta.org.uk/
BECTA, Millburn Hill Road, Science Park, Coventry, CV4 7JJ
________________________________
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
Of Ian Macrae
Sent: 14 June 2007 11:49
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Switching on the Zen Stone
Adrian, I think it also allows you to find out how much space is left.
But I agree with you, and since I fill mine till it's full anyway,
that's hardly an issue. Incidentally, I'd be interested to know whether
anyone actually does get five hundred tracks on there.
----- Original Message -----
From: Adrian Higginbotham
<mailto:adrian.higginbotham@xxxxxxxxxxxx>
To: access-uk@xxxxxxxxxxxxx
Sent: Thursday, June 14, 2007 11:44 AM
Subject: [access-uk] Re: Switching on the Zen Stone
Carol - as a matter of interest what have you needed to use the
creative
software for? So far I haven't bothered to install it as get
along just
fine with windows explorer and audible manager to load the
stone.
Battery meter?
Any other advantages?
Adrian Higginbotham
Accessibility content manager
British Educational Communications and Technology Agency - BECTA
Tel: Direct dial 024 7679 7333 - Becta switchboard 02476-416994.
Email: Adrian.Higginbotham@xxxxxxxxxxxx
Web: http://www.becta.org.uk/
BECTA, Millburn Hill Road, Science Park, Coventry, CV4 7JJ
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx]
On Behalf
Of Carol Pearson
Sent: 13 June 2007 21:08
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Switching on the Zen Stone
Amanda,
I have found this isn't an issue if you're using Windows
Explorer but,
when using the Creative software, it's been a bit picky. I've
found I
need to open Creative, then plug in the Zen Stone.
If you're just using Windows Explorer, you should probably get a
dialogue up, after plugging in the Zen Stone, to indicate a
drive and
ask whether you want to play files etc. . . ..
Hope this helps a bit.
--
Carol
carol.pearson@xxxxxxxxxxxx
----- Original Message -----
From: "Amanda Burt" <amanda.burt1@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, June 13, 2007 8:33 PM
Subject: [access-uk] Re: Switching on the Zen Stone
>I also have a problem with my Zenstone. When i conect it up to
the
>computer and try to transfer files, it tells me that the player
is not
>deteceted. Does anyone know what that could be?
>
> Thanks Amanda.
> ----- Original Message -----
> From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Wednesday, June 13, 2007 8:28 AM
> Subject: [access-uk] Re: Switching on the Zen Stone
>
>
>> Hi Mark,
>>
>> I just hold it in for about three seconds, much like turning
on a
mobile
>> phone, and it seems to work for me every time.
>>
>> All the best
>>
>> Steve
>>
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On
Behalf
>> Of
>> Mark Threadgold
>> Sent: 13 June 2007 08:20
>> To: accessuk list
>> Subject: [access-uk] Switching on the Zen Stone
>>
>> Is there a particular way to turn on the Zen Stone please? I
press
and
>> hold
>> the centre button and fiddle about but it takes over half a
minute to
get
>> it
>> to start playing. Surely there is a simple way to do this?
>>
>> Mark Threadgold
>>
>> Of all the things I have ever lost, the one I miss most is my
mind...
>>
>> ** To leave the list, click on the immediately-following
link:-
>> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on
the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> ** To leave the list, click on the immediately-following
link:-
>> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on
the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
>
> ** To leave the list, click on the immediately-following
link:-
> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
