[THIN] Re: No route to Specified Subnet Address
- From: "Friese, Casey A." <CAFriese@xxxxxxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Thu, 29 Jul 2004 14:04:19 -0500
Thanks for the tips:
I can ping the server just fine from my workstation which is where I open
the WI from. The WI is the same server that is hosting the application that
I'm trying to open. The application is not load balanced - it's
specifically on this server.
What other information would be needed?
-----Original Message-----
From: Parker, Dennis [mailto:Dennis.Parker@xxxxxxxxxx]
Sent: Thursday, July 29, 2004 1:24 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: No route to Specified Subnet Address
Many things could be going wrong here. I'm going to shoot some
troubleshooting ideas at you as there really isn't enough information to
tell what the problem really is.
1. Are the DEV and Production servers on the same subnet? Can you ping the
IP address you believe you should be connecting to from the workstation you
are connecting from?
2. Open a command prompt before clicking on the application icon and
prepare a 'netstat -n' command. Click on the icon and quickly switch back
to the command prompt and execute the 'netstat -n' command. See what IP
address you are attempting to connect to. Make sure it is what you expect
to be connecting to.
3. Do a trace route to the IP address?
4. Probably not an issue, but make sure that CSG and/or translation of the
Citrix address isn't a problem.
If these don't help, shoot more info out and maybe we can help.
Dennis Parker, MCSE, CCA
Senior Systems Analyst
Fiserv EFT/CNS
4550 SW Macadam Ave, Ste 100
Portland, Or. 97239
Direct: 503-274-6785
Fax: 503-274-6619
This e-mail is confidential and may well be legally privileged. If you
have received it in error, you are on notice of its status. Please notify
us immediately by reply e-mail and then delete this message from your
system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. To do so could violate state and Federal
privacy laws.
Thank you for your cooperation. Please contact me if you need assistance.
_____
From: Friese, Casey A. [mailto:CAFriese@xxxxxxxxxxxx]
Sent: Thursday, July 29, 2004 10:27 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] No route to Specified Subnet Address
Using MPS 3.0 and trying to access an app through the WI. When click the
icon, I get "No route to the specified subnet address"
I can successfully launch the app from my dev Citrix server, but not
production. Accessing the WI is all local, not from outside of my company.
I've read many articles on google but they all seem to talk about the
problem when accessing the server from the outside.
The dev and prod WI settings are configured identically.
Anyone offer me any help here?
Other related posts:
