What I have here is the red goes out of focus and you can refocus it and in a while it goes out of focus again. Is that what you're saying you had or just out of focus with no adjust? Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Terry J Hutchison" <sony1@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, August 21, 2004 9:55 AM Subject: [TechAssist] Re: Zenith PTV red goes out of focus > Had two of those this last year, turned out to be resistors on the crt mod. > Not sure of the board position number but one of the sets I had in here red > and blue crt boards had the same resistor open. Hope this helps. Terry > > > > [Original Message] > > From: al m <ampm@xxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Date: 8/20/04 10:31:14 PM > > Subject: [TechAssist] Zenith PTV red goes out of focus > > > > This PTV I changed the focus / screen block and it is still going out of > > focus. Can a bad splitter make only one color go out of focus? I haven't > > tried to switch focus leads. Can I switch the leads coming out of the > > splitter into the focus block? > > Al Marquardt > > ampm@xxxxxxx > > Al Marquardt Electronic Repair > > 206 W Main > > Girardville Pa. 17935 > > > > > > > > > -------------------------------------------------------------------------- -- > - > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/