check for crt coolant dripping on red CRT board. Tony Saracco TCS ELECTRONICS 406 Andra Ct. Gilberts, IL 60136 tcselectronics@xxxxxxxxx ----- Original Message ----- From: "tvservice" <tvservice@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, August 23, 2004 9:27 AM Subject: [TechAssist] Re: Zenith PTV red goes out of focus > I would suspect the crt socket for the one going out of focus > Robert > tvservice@xxxxxxxxxxxxx > H & H Electronics Inc > > ----- Original Message ----- > From: "al m" <ampm@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, August 20, 2004 9:23 PM > Subject: [TechAssist] Zenith PTV red goes out of focus > > > > This PTV I changed the focus / screen block and it is still going out of > > focus. Can a bad splitter make only one color go out of focus? I haven't > > tried to switch focus leads. Can I switch the leads coming out of the > > splitter into the focus block? > > Al Marquardt > > ampm@xxxxxxx > > Al Marquardt Electronic Repair > > 206 W Main > > Girardville Pa. 17935 > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/