[TechAssist] Re: Zenith PTV red goes out of focus
- From: "Terry J Hutchison" <sony1@xxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Sat, 21 Aug 2004 09:55:04 -0400
Had two of those this last year, turned out to be resistors on the crt mod.
Not sure of the board position number but one of the sets I had in here red
and blue crt boards had the same resistor open. Hope this helps. Terry
> [Original Message]
> From: al m <ampm@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Date: 8/20/04 10:31:14 PM
> Subject: [TechAssist] Zenith PTV red goes out of focus
>
> This PTV I changed the focus / screen block and it is still going out of
> focus. Can a bad splitter make only one color go out of focus? I haven't
> tried to switch focus leads. Can I switch the leads coming out of the
> splitter into the focus block?
> Al Marquardt
> ampm@xxxxxxx
> Al Marquardt Electronic Repair
> 206 W Main
> Girardville Pa. 17935
>
>
>
>
----------------------------------------------------------------------------
-
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts: