Would anyone have any ideas on a fix for this JVC AV-32F703. I have replaced C973 fixed the poor solder on W624,replaced the flyback,relay,Q951,D945,have checked CRT, all B+'s are right on the money. Are there any JVC tech's that can shine some light on this I'd really appreciate it. This set will come on normally for about 4-5 seconds then shutsdown and have red led blinks. I have to unplug to get set to run again. Thanks Bill Grabowski -- ********************** Bill Grabowski Triangle Appliance 3813 Roosevelt Rd Kenosha WI 53142 262-694-6500 262-694-6523 fax bgrabowski@xxxxxxxxx ********************** -------- Original Message -------- Subject: JVC AV-32F703 shutsdown Date: Tue, 15 Nov 2005 16:22:14 -0600 From: Bill Grabowski <bgrabowski@xxxxxxxxx> To: techassist@xxxxxxxxxxxxx, tv@xxxxxxxxxxxxxxx This JVC has me stumped it had a vented capacitor C973 and poor solder on jumper W624 just like a couple of tips programs said to look for but it still shuts down after 5-6 seconds. The HV is at 29KV and I even changed the fly even after good ringing suspecting internal arcing. Would anyone have the schematics for this set in PDF. I'd really appreciate it. Thanks much!! ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/