[TechAssist] Re: [Fwd: JVC AV-32F703 shutsdown]

  • From: bgrabowski@xxxxxxxxx
  • To: techassist@xxxxxxxxxxxxx
  • Date: Mon, 21 Nov 2005 11:14:26 -0600

Phil you were right on the money both D432 and Q431 are both shorted. I 
can cross the 
diode to a NTE519 but can't cross the transistor or find it on any JVC 
source site.
Do you have a cross for the transistor???

Thanks so much!!  Bill Grabowski

----- Original Message -----
From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
Date: Monday, November 21, 2005 8:38 am
Subject: [TechAssist] Re: [Fwd: JVC  AV-32F703  shutsdown]

> D432 1ss133          Q431 RN2212-X    You could check these out.
> Phillip R Hull
> phil245@xxxxxxxxxxxxx
> FAX 517--569-3075
> Professional Technicians only
> ----- Original Message ----- 
> From: "Bill Grabowski" <bgrabowski@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>; <tv@xxxxxxxxxxxxxxx>
> Sent: Monday, November 21, 2005 7:34 AM
> Subject: [TechAssist] [Fwd: JVC AV-32F703 shutsdown]
> 
> 
> > Would anyone have any ideas on a fix for this JVC AV-32F703.  I have
> > replaced C973 fixed the poor solder on
> > W624,replaced the flyback,relay,Q951,D945,have checked CRT, all 
> B+'s are
> > right on the money. Are there any JVC
> > tech's that can shine some light on this I'd really appreciate 
> it.  This
> > set will come on normally for about 4-5 seconds
> > then shutsdown and have red led blinks. I have to unplug to get 
> set to
> > run again.
> >
> > Thanks  Bill Grabowski
> >
> > -- 
> > **********************
> > Bill Grabowski
> > Triangle Appliance
> > 3813 Roosevelt Rd
> > Kenosha WI  53142
> > 262-694-6500
> > 262-694-6523   fax
> > bgrabowski@xxxxxxxxx
> > **********************
> >
> >
> > -------- Original Message --------
> > Subject: JVC AV-32F703 shutsdown
> > Date: Tue, 15 Nov 2005 16:22:14 -0600
> > From: Bill Grabowski <bgrabowski@xxxxxxxxx>
> > To: techassist@xxxxxxxxxxxxx, tv@xxxxxxxxxxxxxxx
> >
> >
> >
> > This JVC has me stumped it had a vented capacitor C973 and poor 
> solder> on jumper W624 just like
> > a couple of tips programs said to look for but it still shuts 
> down after
> > 5-6 seconds. The HV is at 29KV and
> > I even changed the fly even after good ringing suspecting internal
> > arcing. Would anyone have the schematics
> > for this set in PDF. I'd really appreciate it. Thanks much!!
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > -----------------------------------------------------------------
> ---------
> ---
> > This Email List is accessible to the general public through search
> engines. Remove: http://www.tech-assist.org/remove.htm
> > Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> > Lost Password: http://www.tech-assist.org  and select "Login 
> Problems?".> Email Archives: 
> //www.freelists.org/archives/techassist/>
> >
> 
> 
> -------------------------------------------------------------------
> ----------
> This Email List is accessible to the general public through search 
> engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation 
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacationLost 
Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines. 
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: