Transmitter was off - me and aidan hooked it up so it was our fault for
messing up the sequence. Turning on receiver, then plugging in to
reciever, then turning on transmitter and plugging in the key worked fine
with no problems
On Jul 6, 2015 4:49 AM, "Jack Garibaldi" <jackgaribaldi@xxxxxxx> wrote:
James
Your sequence must be wrong if you are lighting igniters/rockets without
pushing any buttons
1. When you hook up igniter clips this wire should not be plugged
into the relay module
2. When you hook up relay module plug, your wireless relay module
should be off and the safety clip out
3. Now when you turn on Blue unit safety clip is out now put in
safety clip
4. If unit now goes off no one is by the rocket and you have a an
issue with unit
5. Unit will not turn on unless this sequence is followed
Jack
