[tccrockets] Re: Intimidator 4

Are you flying at balls

James Marino <jmarino1@xxxxxxxxxxxxx> wrote:

>        Gonna rip the fins off another one? Only James can peel a carbon 
> lay-up! 
>
>J
>
>  ----- Original Message ----- 
>  From: James Dougherty 
>  To: tccrockets@xxxxxxxxxxxxx 
>  Cc: tccrockets@xxxxxxxxxxxxx 
>  Sent: Friday, July 08, 2011 10:45 PM
>  Subject: [tccrockets] Re: Intimidator 4
>
>
>  Carbon fiber, vaccuum bag and Cotronics 4525 / Kevlar pulp fillets
>  Messy, but worth the effort
>  I'm gonna fly another c-star just to prove finish is everything :-)
>
>
>
>  Sent from my iPhone
>
>  On Jul 8, 2011, at 10:45 AM, Rob Diehl <rwdiehl@xxxxxxxxxxxxx> wrote:
>
>
>    Did you guys use injected internal fillets?  Or did you reinforce with 
> carbon/kevlar cloth and foam?
>
>
>
>
>----------------------------------------------------------------------------
>    From: mike bailey <aerofabb@xxxxxxxxxxxx>
>    To: tccrockets@xxxxxxxxxxxxx
>    Sent: Fri, July 8, 2011 1:45:32 AM
>    Subject: [tccrockets] Re: Intimidator 4
>
>    It will go into a Kosdon 75/7600 casing.  they same size.  I have one.
>
>
>
>
>
>    -----Original Message-----
>    From: Karl Baumheckel <karlbaum@xxxxxxxxxxx>
>    To: tccrockets <tccrockets@xxxxxxxxxxxxx>
>    Sent: Thu, Jul 7, 2011 8:26 pm
>    Subject: [tccrockets] Re: Intimidator 4
>
>
>    Just to clarify the M1450 is a KBA "Animal Compatible" and goes in the AMW 
> 7600 case with a reusable nozzle.  One nice thing about the AMW case is that 
> it is great for EX motors.  It seems like a great deal to me.
>
>
>
>
>----------------------------------------------------------------------------
>    From: "mike bailey" <aerofabb@xxxxxxxxxxxx>
>    To: tccrockets@xxxxxxxxxxxxx
>    Sent: Thursday, July 7, 2011 7:09:38 PM
>    Subject: [tccrockets] Re: Intimidator 4
>
>    I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor and 
> was use to set the M altitude record, its more powerful than the M1850W  
> 7658.6Ns.  and for around 299.00  its about a hundred dollars cheaper than 
> the M1850W
>
>
>
>
>    -----Original Message-----
>    From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx>
>    To: tccrockets <tccrockets@xxxxxxxxxxxxx>
>    Sent: Wed, Jul 6, 2011 7:07 pm
>    Subject: [tccrockets] Re: Intimidator 4
>
>
>    The AeroTech M1850W is no puss motor for the 75/7680.  It lofted my 
> Performance Rocketry Competitor 4 to 18,600 feet.   
>
>
>    Video by James Dougherty:
>    http://www.youtube.com/watch?v=wdRS2xaqtbc
>
>
>    But just leave that 75mm motor mount out of the Intimidator 4, make it a 
> minimum diameter, and fly it on an M750W 8^D
>
>
>    Aaron Stanley
>    LUNAR# 1322
>    AEROPAC# 680
>    SARG# 10  - Equipment Manager
>    TRA# 10834 L3
>    NAR# 84298 L3
>    West Coast Aerotech Demo representative.
>    Aerotech the BEST way to fly.
>
>
>
>
>
>----------------------------------------------------------------------------
>    From: "James Marino" <jmarino1@xxxxxxxxxxxxx>
>    To: tccrockets@xxxxxxxxxxxxx
>    Sent: Wednesday, July 6, 2011 10:22:46 AM
>    Subject: [tccrockets] Re: Intimidator 4
>
>
>            It has to fly on puss motors. It has a 75mm mount. 
>
>            The Intimidator 5 and the Competitor 5 both have 98mm holes in the 
> bottom. 
>
>            They take real motors. 8^)
>
>    J
>
>      ----- Original Message ----- 
>      From: Jack Garibaldi 
>      To: tccrockets@xxxxxxxxxxxxx 
>      Sent: Tuesday, July 05, 2011 10:33 PM
>      Subject: [tccrockets] Re: Intimidator 4
>
>
>      Yes as long as you don’t fly it on any puss motor
>
>      Jack G
>
>      From: tccrockets-bounce@xxxxxxxxxxxxx 
> [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
>      Sent: Tuesday, July 05, 2011 10:10 PM
>      To: tccrockets@xxxxxxxxxxxxx
>      Subject: [tccrockets] Intimidator 4
>
>      Ok, I got my Intimidator 4 kit today.  Does anyone know where I can find 
> 2 TAP’s to do my L3?
>
>
>      Rob

Other related posts: