[tccrockets] Re: Intimidator 4

Thanks for the "shrinker" James!

RK

  ----- Original Message ----- 
  From: James Marino 
  To: tccrockets@xxxxxxxxxxxxx 
  Sent: Saturday, July 09, 2011 7:37 AM
  Subject: [tccrockets] Re: Intimidator 4


          You know, Cheecharoni makes certified O motors now.

          But if you're scared, you could use a little wussy N2K...

          Oh, uh... Good morning, Richard!

          8^)

  J

    ----- Original Message ----- 
    From: Richard King 
    To: tccrockets@xxxxxxxxxxxxx 
    Sent: Saturday, July 09, 2011 12:24 AM
    Subject: [tccrockets] Re: Intimidator 4


    Is that the new term for 75 mm?  Puss motors?  Thank God I used an N2000 
for my L3....  Must stay secure you know........

    RK


      ----- Original Message ----- 
      From: James Marino 
      To: tccrockets@xxxxxxxxxxxxx 
      Sent: Saturday, July 09, 2011 12:13 AM
      Subject: [tccrockets] Re: Intimidator 4


              Gonna rip the fins off another one? Only James can peel a carbon 
lay-up! 

      J

        ----- Original Message ----- 
        From: James Dougherty 
        To: tccrockets@xxxxxxxxxxxxx 
        Cc: tccrockets@xxxxxxxxxxxxx 
        Sent: Friday, July 08, 2011 10:45 PM
        Subject: [tccrockets] Re: Intimidator 4


        Carbon fiber, vaccuum bag and Cotronics 4525 / Kevlar pulp fillets
        Messy, but worth the effort
        I'm gonna fly another c-star just to prove finish is everything :-)



        Sent from my iPhone

        On Jul 8, 2011, at 10:45 AM, Rob Diehl <rwdiehl@xxxxxxxxxxxxx> wrote:


          Did you guys use injected internal fillets?  Or did you reinforce 
with carbon/kevlar cloth and foam?




----------------------------------------------------------------------
          From: mike bailey <aerofabb@xxxxxxxxxxxx>
          To: tccrockets@xxxxxxxxxxxxx
          Sent: Fri, July 8, 2011 1:45:32 AM
          Subject: [tccrockets] Re: Intimidator 4

          It will go into a Kosdon 75/7600 casing.  they same size.  I have one.





          -----Original Message-----
          From: Karl Baumheckel <karlbaum@xxxxxxxxxxx>
          To: tccrockets <tccrockets@xxxxxxxxxxxxx>
          Sent: Thu, Jul 7, 2011 8:26 pm
          Subject: [tccrockets] Re: Intimidator 4


          Just to clarify the M1450 is a KBA "Animal Compatible" and goes in 
the AMW 7600 case with a reusable nozzle.  One nice thing about the AMW case is 
that it is great for EX motors.  It seems like a great deal to me.




----------------------------------------------------------------------
          From: "mike bailey" <aerofabb@xxxxxxxxxxxx>
          To: tccrockets@xxxxxxxxxxxxx
          Sent: Thursday, July 7, 2011 7:09:38 PM
          Subject: [tccrockets] Re: Intimidator 4

          I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor 
and was use to set the M altitude record, its more powerful than the M1850W  
7658.6Ns.  and for around 299.00  its about a hundred dollars cheaper than the 
M1850W




          -----Original Message-----
          From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx>
          To: tccrockets <tccrockets@xxxxxxxxxxxxx>
          Sent: Wed, Jul 6, 2011 7:07 pm
          Subject: [tccrockets] Re: Intimidator 4


          The AeroTech M1850W is no puss motor for the 75/7680.  It lofted my 
Performance Rocketry Competitor 4 to 18,600 feet.   


          Video by James Dougherty:
          http://www.youtube.com/watch?v=wdRS2xaqtbc


          But just leave that 75mm motor mount out of the Intimidator 4, make 
it a minimum diameter, and fly it on an M750W 8^D


          Aaron Stanley
          LUNAR# 1322
          AEROPAC# 680
          SARG# 10  - Equipment Manager
          TRA# 10834 L3
          NAR# 84298 L3
          West Coast Aerotech Demo representative.
          Aerotech the BEST way to fly.





----------------------------------------------------------------------
          From: "James Marino" <jmarino1@xxxxxxxxxxxxx>
          To: tccrockets@xxxxxxxxxxxxx
          Sent: Wednesday, July 6, 2011 10:22:46 AM
          Subject: [tccrockets] Re: Intimidator 4


                  It has to fly on puss motors. It has a 75mm mount. 

                  The Intimidator 5 and the Competitor 5 both have 98mm holes 
in the bottom. 

                  They take real motors. 8^)

          J

            ----- Original Message ----- 
            From: Jack Garibaldi 
            To: tccrockets@xxxxxxxxxxxxx 
            Sent: Tuesday, July 05, 2011 10:33 PM
            Subject: [tccrockets] Re: Intimidator 4


            Yes as long as you don’t fly it on any puss motor

            Jack G

            From: tccrockets-bounce@xxxxxxxxxxxxx 
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
            Sent: Tuesday, July 05, 2011 10:10 PM
            To: tccrockets@xxxxxxxxxxxxx
            Subject: [tccrockets] Intimidator 4

            Ok, I got my Intimidator 4 kit today.  Does anyone know where I can 
find 2 TAP’s to do my L3?


            Rob

Other related posts: