Thanks Karl and James M. I will probably decide once I trial fit the parts and see how it looks. From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Karl Baumheckel Sent: Friday, July 08, 2011 10:17 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Intimidator 4 I recently built a rocket with injected fillets. But I went a couple of steps further than Wildman. First I epoxied square wood strips onto the motor mount between the center rings and each side of the fin slot. This way the fillets don't fill up the entire fin can, only 1/2 inch each side of the fin. Secondly I drilled holes in the part of the fin that goes between the air frame and motor mount. This way the inside fillet epoxy can get a good mechanical hold of the fin root. I think this makes a solid fin can. _____ From: "Rob Diehl" <rwdiehl@xxxxxxxxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Friday, July 8, 2011 9:30:59 PM Subject: [tccrockets] Re: Intimidator 4 Re: GPS - We’ll need to talk. I’m still working on my 54mm bird. I am having some trouble filling the voids on the fins. I’ll try another sand and fill this weekend. After that, I can start on the Intimidator. What is your opinion on the injected fillets like the instructions on the Wildman kits? There isn’t a lot of room to work between the motor mount and body tube. From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of James Dougherty Sent: Friday, July 08, 2011 7:48 AM To: tccrockets@xxxxxxxxxxxxx Cc: <tccrockets@xxxxxxxxxxxxx> Subject: [tccrockets] Re: Intimidator 4 You got it! Sent from my iPhone On Jul 7, 2011, at 11:12 PM, "Rob Diehl" <rwdiehl@xxxxxxxxxxxxx> wrote: Im thinking I would need gps telemetry for that… From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of James Dougherty Sent: Wednesday, July 06, 2011 11:05 PM To: James Dougherty Cc: tccrockets@xxxxxxxxxxxxx; <tccrockets@xxxxxxxxxxxxx> Subject: [tccrockets] Re: Intimidator 4 Oh yeah, I flew mine on an L skid at TCC last and it made 12k, a small M would keep it right under the waiver for a cert flight so here is a nice use for 75mm - fly the bird on a small puss M motor and then crank it at BALLS with a C-star (*) !!!! Sent from my iPhone On Jul 6, 2011, at 10:58 PM, James Dougherty <jafrado@xxxxxxxxx> wrote: I have a 4" intimidator 4 Cool rocket, but no matter what load you pick, probably not enough Chutzpah The C* would be a cool flight Sent from my iPhone On Jul 6, 2011, at 10:55 PM, James Dougherty <jafrado@xxxxxxxxx> wrote: C* Sent from my iPhone On Jul 6, 2011, at 8:42 PM, Jack Garibaldi <jackgaribaldi@xxxxxxx> wrote: I was thinking maybe an 75/6 grain M3700 or M3100 5 grain From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Aaron Stanley Sent: Wednesday, July 06, 2011 7:07 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Intimidator 4 The AeroTech M1850W is no puss motor for the 75/7680. It lofted my Performance Rocketry Competitor 4 to 18,600 feet. Video by James Dougherty: http://www.youtube.com/watch?v=wdRS2xaqtbc But just leave that 75mm motor mount out of the Intimidator 4, make it a minimum diameter, and fly it on an M750W 8^D Aaron Stanley LUNAR# 1322 AEROPAC# 680 SARG# 10 - Equipment Manager TRA# 10834 L3 NAR# 84298 L3 West Coast <http://www.wemakethegoodstuff.com/> Aerotech Demo representative. <http://www.wemakethegoodstuff.com/> Aerotech the BEST way to fly. _____ From: "James Marino" <jmarino1@xxxxxxxxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Wednesday, July 6, 2011 10:22:46 AM Subject: [tccrockets] Re: Intimidator 4 It has to fly on puss motors. It has a 75mm mount. The Intimidator 5 and the Competitor 5 both have 98mm holes in the bottom. They take real motors. 8^) J ----- Original Message ----- From: Jack Garibaldi <mailto:jackgaribaldi@xxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Tuesday, July 05, 2011 10:33 PM Subject: [tccrockets] Re: Intimidator 4 Yes as long as you don’t fly it on any puss motor Jack G From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl Sent: Tuesday, July 05, 2011 10:10 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Intimidator 4 Ok, I got my Intimidator 4 kit today. Does anyone know where I can find 2 TAP’s to do my L3? Rob