[tccrockets] Re: Intimidator 4

        I have what amounts to the same rocket, the Competitor 4. I did a 
lay-up with glass over carbon, and Kevlar pulp doped fillets. Holds up well to 
6000 NSec research M's. So far. 18K at Black Rock. 

        Have one just like it we'll be staging at XPRS-Rx this September. Full 
M to a 6KNSec M. It'll kiss Mach 3. I expect it to come back OK, if not with a 
little slipped paint. 8^)

James

  ----- Original Message ----- 
  From: Rob Diehl 
  To: tccrockets@xxxxxxxxxxxxx 
  Sent: Friday, July 08, 2011 10:45 AM
  Subject: [tccrockets] Re: Intimidator 4


  Did you guys use injected internal fillets?  Or did you reinforce with 
carbon/kevlar cloth and foam?




------------------------------------------------------------------------------
  From: mike bailey <aerofabb@xxxxxxxxxxxx>
  To: tccrockets@xxxxxxxxxxxxx
  Sent: Fri, July 8, 2011 1:45:32 AM
  Subject: [tccrockets] Re: Intimidator 4

  It will go into a Kosdon 75/7600 casing.  they same size.  I have one.





  -----Original Message-----
  From: Karl Baumheckel <karlbaum@xxxxxxxxxxx>
  To: tccrockets <tccrockets@xxxxxxxxxxxxx>
  Sent: Thu, Jul 7, 2011 8:26 pm
  Subject: [tccrockets] Re: Intimidator 4


  Just to clarify the M1450 is a KBA "Animal Compatible" and goes in the AMW 
7600 case with a reusable nozzle.  One nice thing about the AMW case is that it 
is great for EX motors.  It seems like a great deal to me.




------------------------------------------------------------------------------
  From: "mike bailey" <aerofabb@xxxxxxxxxxxx>
  To: tccrockets@xxxxxxxxxxxxx
  Sent: Thursday, July 7, 2011 7:09:38 PM
  Subject: [tccrockets] Re: Intimidator 4

  I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor and was 
use to set the M altitude record, its more powerful than the M1850W  7658.6Ns.  
and for around 299.00  its about a hundred dollars cheaper than the M1850W




  -----Original Message-----
  From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx>
  To: tccrockets <tccrockets@xxxxxxxxxxxxx>
  Sent: Wed, Jul 6, 2011 7:07 pm
  Subject: [tccrockets] Re: Intimidator 4


  The AeroTech M1850W is no puss motor for the 75/7680.  It lofted my 
Performance Rocketry Competitor 4 to 18,600 feet.   


  Video by James Dougherty:
  http://www.youtube.com/watch?v=wdRS2xaqtbc


  But just leave that 75mm motor mount out of the Intimidator 4, make it a 
minimum diameter, and fly it on an M750W 8^D


  Aaron Stanley
  LUNAR# 1322
  AEROPAC# 680
  SARG# 10  - Equipment Manager
  TRA# 10834 L3
  NAR# 84298 L3
  West Coast Aerotech Demo representative.
  Aerotech the BEST way to fly.





------------------------------------------------------------------------------
  From: "James Marino" <jmarino1@xxxxxxxxxxxxx>
  To: tccrockets@xxxxxxxxxxxxx
  Sent: Wednesday, July 6, 2011 10:22:46 AM
  Subject: [tccrockets] Re: Intimidator 4


          It has to fly on puss motors. It has a 75mm mount. 

          The Intimidator 5 and the Competitor 5 both have 98mm holes in the 
bottom. 

          They take real motors. 8^)

  J

    ----- Original Message ----- 
    From: Jack Garibaldi 
    To: tccrockets@xxxxxxxxxxxxx 
    Sent: Tuesday, July 05, 2011 10:33 PM
    Subject: [tccrockets] Re: Intimidator 4


    Yes as long as you don’t fly it on any puss motor

    Jack G

    From: tccrockets-bounce@xxxxxxxxxxxxx 
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Rob Diehl
    Sent: Tuesday, July 05, 2011 10:10 PM
    To: tccrockets@xxxxxxxxxxxxx
    Subject: [tccrockets] Intimidator 4

    Ok, I got my Intimidator 4 kit today.  Does anyone know where I can find 2 
TAP’s to do my L3?


    Rob

Other related posts: