Did you guys use injected internal fillets? Or did you reinforce with carbon/kevlar cloth and foam? ________________________________ From: mike bailey <aerofabb@xxxxxxxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Fri, July 8, 2011 1:45:32 AM Subject: [tccrockets] Re: Intimidator 4 It will go into a Kosdon 75/7600 casing. they same size. I have one. -----Original Message----- From: Karl Baumheckel <karlbaum@xxxxxxxxxxx> To: tccrockets <tccrockets@xxxxxxxxxxxxx> Sent: Thu, Jul 7, 2011 8:26 pm Subject: [tccrockets] Re: Intimidator 4 Just to clarify the M1450 is a KBA "Animal Compatible" and goes in the AMW 7600 case with a reusable nozzle. One nice thing about the AMW case is that it is great for EX motors. It seems like a great deal to me. ________________________________ From: "mike bailey" <aerofabb@xxxxxxxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Thursday, July 7, 2011 7:09:38 PM Subject: [tccrockets] Re: Intimidator 4 I would use a Kosdon by Aerotech 75/7600 , M1450 its 7813.0Ns motor and was use to set the M altitude record, its more powerful than the M1850W 7658.6Ns. and for around 299.00 its about a hundred dollars cheaper than the M1850W -----Original Message----- From: Aaron Stanley <rocketguy1317@xxxxxxxxxxx> To: tccrockets <tccrockets@xxxxxxxxxxxxx> Sent: Wed, Jul 6, 2011 7:07 pm Subject: [tccrockets] Re: Intimidator 4 The AeroTech M1850W is no puss motor for the 75/7680. It lofted my Performance Rocketry Competitor 4 to 18,600 feet. Video by James Dougherty: http://www.youtube.com/watch?v=wdRS2xaqtbc But just leave that 75mm motor mount out of the Intimidator 4, make it a minimum diameter, and fly it on an M750W 8^D Aaron Stanley LUNAR# 1322 AEROPAC# 680 SARG# 10 - Equipment Manager TRA# 10834 L3 NAR# 84298 L3 West Coast AerotechDemo representative. Aerotech the BEST way to fly. ________________________________ From: "James Marino" <jmarino1@xxxxxxxxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Wednesday, July 6, 2011 10:22:46 AM Subject: [tccrockets] Re: Intimidator 4 It has to fly on puss motors. It has a 75mm mount. The Intimidator 5 and the Competitor 5 both have 98mm holes in the bottom. They take real motors. 8^) J ----- Original Message ----- >From: Jack Garibaldi >To: tccrockets@xxxxxxxxxxxxx >Sent: Tuesday, July 05, 2011 10:33 PM >Subject: [tccrockets] Re: Intimidator 4 > > >Yes as long as you don’t fly it on any puss motor > >Jack G > >From:tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] >On >Behalf Of Rob Diehl >Sent: Tuesday, July 05, 2011 10:10 PM >To: tccrockets@xxxxxxxxxxxxx >Subject: [tccrockets] Intimidator 4 > >Ok, I got my Intimidator 4 kit today. Does anyone know where I can find 2 >TAP’s >to do my L3? > > >Rob