I've got pretty close to 100,000 miles on Pertronix with only one hiccup (which was MY mistake)...And, yes, I DO carry a dizzie with points/condenser ready to slap in if needed... --- On Wed, 2/16/11, Shakey Spudman <dblcab67@xxxxxxxxx> wrote: From: Shakey Spudman <dblcab67@xxxxxxxxx> Subject: [tcb] Re: Electronic Ignition To: tcb@xxxxxxxxxxxxx Date: Wednesday, February 16, 2011, 12:37 PM Like I told you before Fred you need a good carb. A good german rebuilt. Read the samba threads on the bulletproof carbs. Stay away from new brazilian or mexican junk. A new set of points properly gapped will last 12000 miles at least. It sounds to me like your chasing your tail. Remember sometimes you have two or three problems going on at the same time. Fixing one does not fix all. But if you want to throw more money at an electronic setup go ahead. Remember down the road if you forget what lead goes where and hook it up backwards-poof-there it goes. But you do get to witness what $100 in smoke looks like. Shakey On Wed, Feb 16, 2011 at 11:35 AM, Justin <sunbugone@xxxxxxxxx> wrote: If it still has the stock distributor (vacuum advance). Then buy a pertronix unit that fits the stock distributor. The style of carburetor will come into play as well. The brosol H30/31 carbs do not run well with certain distributors. I usually throw 009 distributors in the garbage. Just my two cents Sent from my iPhone On Feb 16, 2011, at 11:12 AM, "Fred McDonald" <texasbluebus@xxxxxxxxx> wrote: 1) Where is Automotive Machine? 2) I have a stock 1600 single port motor with an alternator. From: theresabuckner@xxxxxxx Sent: Wednesday, February 16, 2011 10:46 AM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: Electronic Ignition Fred you know Automotive Machine sells a set much cheaper & if you give them a few min. they will put them in your dist. for you if you wish terry -----Original Message----- From: Fred McDonald <texasbluebus@xxxxxxxxx> To: tcb <tcb@xxxxxxxxxxxxx> Sent: Wed, Feb 16, 2011 10:37 am Subject: [tcb] Electronic Ignition I want to convert to electronic ignition, http://www2.cip1.com/ProductDetails.asp?ProductCode=NFD%2D5600%2DBL This is the kit I’m considering. Any thoughts?