[SI-LIST] Re: Ground Pour in Signal Layers
- From: "Yuming Tao" <YTAO@xxxxxxxxxx>
- To: <Pradeep.RSA@xxxxxxxxxxxx>, <si-list@xxxxxxxxxxxxx>
- Date: Thu, 23 Feb 2006 09:58:02 -0500
Hi, Pradeep
My point of view, Ground pour on the signal layers (especially =
intra-layer) is not useful unless you intend to create a grounded shield =
signal channel for special signal routing, eg. high-speed signals then =
ground via-array is required to connect GND plane vertically. This will =
take lot of routing area. If you are looking for isolation, adding =
ground between signal traces won't help since the spacing is a =
dominator.
if you are routing high-speed signal traces on top/bottom layers, you =
may think using ground pour to create coplanar waveguide (CPW) for high =
signal quality.=20
Regards,
Yuming =20
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Pradeep RSA
Sent: Thursday, February 23, 2006 3:04 AM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Ground Pour in Signal Layers
Hi,
does a Ground Pour in the Signal layers in a multilayer PCB (with=20
sufficient internal ground planes) really helps?
=20
Thanks in advance
Pradeep
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at: =20
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- Follow-Ups:
- [SI-LIST] Re: Ground Pour in Signal Layers
- From: Richard P EVANS
Other related posts:
- » [SI-LIST] Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- » [SI-LIST] Re: Ground Pour in Signal Layers
- [SI-LIST] Re: Ground Pour in Signal Layers
- From: Richard P EVANS