[roc-chat] Re: Assistance with Repair on ROC PA System
- From: R Dierking <applerocketry@xxxxxxxxxxx>
- To: "roc-chat@xxxxxxxxxxxxx" <roc-chat@xxxxxxxxxxxxx>
- Date: Wed, 27 Aug 2014 17:11:56 -0700
Yes, this is what I wanted to do; hardware with some strain relief.
Let's see who will do this. Good to get others involved with the club.
Are you still going to XPRS?
Sent from my iPhone
On Aug 27, 2014, at 4:22 PM, "Kurt Gugisberg" <kurtgug@xxxxxxxxx> wrote:
> Richard,
>
> Just back from vacation. Regarding the plug connector, can you remove the
> female jack in the box and just hardwire the lead to it. No real need to
> have a connection there if you think about it.
>
> Kurt
>
>
> On Sat, Aug 23, 2014 at 9:55 AM, R Dierking <applerocketry@xxxxxxxxxxx> wrote:
>> The connector for the small PA system 12 VDC is damaged/loose. Please see
>> the attached photo. We only use this small PA for the regular monthly
>> launches. We have a back-up (my PA system) we can use for the September
>> launch.
>>
>> I would like to get the connector repaired for the December launch but I
>> don't have the skill to either replace the connector or solder the power
>> supply cable directly to the PC board and install some strain relief.
>>
>> Please let me know if you can help with this.
>>
>> Thank you,
>> Richard Dierking
>> (951) 526-5224
>
Other related posts:
