[roc-chat] Re: Assistance with Repair on ROC PA System
- From: Kurt Gugisberg <kurtgug@xxxxxxxxx>
- To: "roc-chat@xxxxxxxxxxxxx" <roc-chat@xxxxxxxxxxxxx>
- Date: Wed, 27 Aug 2014 16:21:37 -0700
Richard,
Just back from vacation. Regarding the plug connector, can you remove the
female jack in the box and just hardwire the lead to it. No real need to
have a connection there if you think about it.
Kurt
On Sat, Aug 23, 2014 at 9:55 AM, R Dierking <applerocketry@xxxxxxxxxxx>
wrote:
> The connector for the small PA system 12 VDC is damaged/loose. Please see
> the attached photo. We only use this small PA for the regular monthly
> launches. We have a back-up (my PA system) we can use for the September
> launch.
>
> I would like to get the connector repaired for the December launch but I
> don't have the skill to either replace the connector or solder the power
> supply cable directly to the PC board and install some strain relief.
>
> Please let me know if you can help with this.
>
> Thank you,
> Richard Dierking
> (951) 526-5224
>
Other related posts:
