Dim halogens by moving them farther away Larry cuffe Sent from my iPhone On Nov 7, 2007, at 8:52, Claudio Bonavolta <claudio@xxxxxxxxxxxx> wrote:
----- Message d'origine ----- De: Shannon Stoney <shannonstoney@xxxxxxxxxxxxxxx> Date: Wed, 7 Nov 2007 07:21:00 -0600 Sujet: [pure-silver] Re: light for viewing prints À: pure-silver@xxxxxxxxxxxxxHow do you measure the "lux" part or set the intensity of halogen lights? --shannonThe tool to measure light intensity is called a "luxmeter" and you can find some reasonably cheap ones, general models for ambient lighting, which are sufficient for your/our limited usage.Electronic stores have that kind of devices.You should measure a light source at the same distance as the print will be as light intensity decreases rapidly with distance."Way Beyond Monochrome" book gives some guidelines on light intensity to view prints. I just don't remember the Lux values but should be able to give them to you tonight.You can dim a halogen light source with a ... dimmer, it's a very common device available in all supermarkets. But keep in mind that the more you dim a tungsten/halogen light source the lower the color temperature resulting in a warmer tone.That's not acceptable for color work and I would avoid it in B/W too.If your light is to strong, use a lower wattage bulb but use it at full power which gives a better color.Claudio Bonavolta http://www.bonavolta.ch=== === === === === === === === === === === === === === ==================================================================To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.
============================================================================================================To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.