Kent, msgget is not used anymore. You can comment out line 86 from arq.pm: # die "msgget failed: $!\n" unless defined $txid; I guess you will get the next error message until you have properly installed the perl libs. The libinstall script will do all the cpan stuff for you. I would install version 0.8.1 which is on the download site. Don't forget to switch logging on in fldigi 3.10. 73, Rein PA0R > -----Ursprüngliche Nachricht----- > Von: "Kent VE4KEH" <pb232641@xxxxxxx> > Gesendet: 31.03.09 04:59:43 > An: pskmail mailing list <pskmail@xxxxxxxxxxxxx> > Betreff: [pskmail] PSKmail server Ignoring Fldigi > I've got server V0.8 installed under Debian Squeeze. The server appears to > start, with errors, but ignores anything Fldigi (3.10) captures. > > spanky@aurora:~$ pskmail_server > > ### Server v. Pskmail v.0.8. (C) 2009 PA0R > 01:41 UTC Mar-31-2009: Program start > # msgget failed > Compilation failed in require at > /usr/local/share/pskmail_server/rflinkserver.pl line 53. > BEGIN failed--compilation aborted at > /usr/local/share/pskmail_server/rflinkserver.pl line 53. > 1 > 01:41 UTC Mar-31-2009: Listening to the radio > 01:42 UTC Mar-31-2009: Connected to netherlands.aprs2.net > 01:42 UTC Mar-31-2009: > Send>APRS-IS:VE4KEH>PSKAPR:@310141z4955.74NP09706.86W&PSKmail server 0.8 > ... > > If I telnet localhost 7322, I get everything that Fldigi receives, so it > doesn't look like a firewall issue. > > I could swear I had things working under V0.7.24! > > -- > Kent VE4KEH > > > -- http://pa0r.blogspirit.com