[optimal] Re: question about OCT-C Certification

  • From: "Steve Lusk" <slusk@xxxxxxxxxxxxx>
  • To: <optimal@xxxxxxxxxxxxx>
  • Date: Wed, 13 Aug 2014 12:52:47 -0400

Great thanks for the info. I do have one other question. I know there is the 
exam fee for OPS, do we have to pay an additional fee to the company who comes 
to our locality to administer the written exam? 
 
 
Steve Lusk, CRA
Vistar Eye Center Retina Consultants
5296 Peters Creek Road
Roanoke, VA 24019
Phone: (540) 342-3400 ext. 4731
Fax: (540) 362-1155
slusk@xxxxxxxxxxxxx
www.vistareye.com <http://www.vistareye.com/> 
 
The information contained in this email may contain confidential health
information that is privileged and legally protected from disclosure by
federal law, the Health Insurance Portability and Accountability Act
(HIPAA). This information is intended only for the use of the individual
or
entity named above. If you are not the intended recipient, you are herby
notified that reading, disseminating, disclosing, distributing, copying,
acting upon or otherwise using the information contained in this
facsimile
is strictly prohibited. If you have received this information in error,
please notify the sender immediately.

Thank you.


________________________________

From: optimal-bounce@xxxxxxxxxxxxx on behalf of Miller CRA, OCT-C, Gary E.
Sent: Wed 8/13/2014 10:05 AM
To: optimal@xxxxxxxxxxxxx
Subject: [optimal] Re: question about OCT-C Certification



Great! You are welcome, Steve.

 

By the way, I am not sure if you or others out there are aware, but the OPS 
Board of Certification has just launched their new, updated OCT-C exam which 
now includes Spectral Domain technology. Also, the cost of the exam has been 
dropped to $200 for those taking the exam before September 28, 2014!! The only 
thing to be aware of is the scores for those taking the exam during this 
special pricing period will be held until mid October. So you would need to 
wait until then to hear if you passed.

 

Let me know if you have any other questions, Steve...

 

Gary

 

________________________________

From: optimal-bounce@xxxxxxxxxxxxx [optimal-bounce@xxxxxxxxxxxxx] on behalf of 
Steve Lusk [slusk@xxxxxxxxxxxxx]
Sent: Wednesday, August 13, 2014 9:24 AM
To: optimal@xxxxxxxxxxxxx
Subject: [optimal] Re: question about OCT-C Certification


Excellent. That is what I was looking for. 
Thanks!
 
 
 
Steve Lusk, CRA
Vistar Eye Center Retina Consultants
5296 Peters Creek Road
Roanoke, VA 24019
Phone: (540) 342-3400 ext. 4731
Fax: (540) 362-1155
slusk@xxxxxxxxxxxxx
www.vistareye.com <http://www.vistareye.com/> 
 
The information contained in this email may contain confidential health
information that is privileged and legally protected from disclosure by
federal law, the Health Insurance Portability and Accountability Act
(HIPAA). This information is intended only for the use of the individual
or
entity named above. If you are not the intended recipient, you are herby
notified that reading, disseminating, disclosing, distributing, copying,
acting upon or otherwise using the information contained in this
facsimile
is strictly prohibited. If you have received this information in error,
please notify the sender immediately.

Thank you.


________________________________

From: optimal-bounce@xxxxxxxxxxxxx on behalf of Cornelia Beyer
Sent: Wed 8/13/2014 2:36 AM
To: optimal@xxxxxxxxxxxxx
Subject: [optimal] Re: question about OCT-C Certification


Agee with Gary , we only use 1/1/1990 for OCT-Portfolio and Clinical Trial 
purposes


On Tue, Aug 12, 2014 at 1:51 PM, Steve Lusk <slusk@xxxxxxxxxxxxx> wrote:


        I have quite a mundane question that as a group, we are split on. Under 
the naming convention for OCT, do we enter the applicants birthday or is 
1-1-1900 simply used as a signifier to satisfy the software requirements.
        Thanks
        
        Steve Lusk, CRA
        Vistar Eye Center Retina Consultants
        5296 Peters Creek Road
        Roanoke, VA 24019
        Phone: (540) 342-3400 ext. 4731 
<https://outlook.geisinger.edu/owa/UrlBlockedError.aspx> 
        Fax: (540) 362-1155 
<https://outlook.geisinger.edu/owa/UrlBlockedError.aspx> 
        slusk@xxxxxxxxxxxxx
        www.vistareye.com <http://www.vistareye.com/> 
        
        The information contained in this email may contain confidential health
        information that is privileged and legally protected from disclosure by
        federal law, the Health Insurance Portability and Accountability Act
        (HIPAA). This information is intended only for the use of the individual
        or
        entity named above. If you are not the intended recipient, you are 
hereby
        notified that reading, disseminating, disclosing, distributing, copying,
        acting upon or otherwise using the information contained in this
        facsimile
        is strictly prohibited. If you have received this information in error,
        please notify the sender immediately.
        
        Thank you.
        
        
        
        -----Original Message-----
        From: optimal-bounce@xxxxxxxxxxxxx on behalf of aissa9400@xxxxxxxxx
        Sent: Sun 8/10/2014 10:00 AM
        To: optimal@xxxxxxxxxxxxx
        Subject: [optimal] Re: Photographing techniques using a Zeiss 2x 
magnification lens
        
        James,
        
        I figured that. I'm going to try everyone's suggestions this week and 
hopefully my eyes will cooperate.
        
        A.D. sent by iPhone
        
        
        > On Aug 10, 2014, at 9:00 AM, JamesStrong <jamesdstrong@xxxxxxxxx> 
wrote:
        >
        > FWIW - changing settings on the camera body will have no affect on 
focus/parfocality - it's an optics issues.
        >
        > j-
        >
        >
        >> On Sat, Aug 9, 2014 at 11:22 AM, Eric Kegley 
<ekegley@xxxxxxxxxxxxxxxxx> wrote:
        >> Because the mag is higher, it is very important that your image is 
as sharp as possible trough the eyepiece. Also, you said something about the 
diopter compensation wheel being as plus as possible.  You shouldn't have to 
change that unless your subject is very hyperopic. My advice would be to make 
sure your reticle is very well focused and then focus carefully on the center 
of the frame.
        >>
        >> Thanks,
        >> EK
        >>
        >> Eric Kegley, CRA, COA
        >> Director of Ophthalmic Imaging
        >> 6560 Fannin St., Suite 750
        >> Houston, TX 77030
        >> Main 713 524-3434 
<https://outlook.geisinger.edu/owa/UrlBlockedError.aspx> 
        >>
        >> Sent from my iPhone
        >>
        >>> On Aug 9, 2014, at 9:31 AM, Marshall Tyler 
<marshalletyler@xxxxxxxxx> wrote:
        >>>
        >>> Are the eyepiece sharp at the same time as the image is sharp?
        >>> Try a test target of a ruler or sm as 'll printed text which you 
tilt relative to the plane of focus. It should be sharp in the center. If sharp 
closer or further away you have a focusing problem. If is not sharp anywhere 
you may have a lens/system problem.
        >>>
        >>> Thank you,
        >>> Marshall
        >>> Marshall E Tyler
        >>>
        >>>> On Aug 8, 2014 11:09 PM, <aissa9400@xxxxxxxxx> wrote:
        >>>> Thanks Jeremy for the eye opener. I hope it's not a waste $ for 
the lens.
        >>>>
        >>>> I've changed the compensation lens to the highest plus mag on the 
FF4 and turn the dial all the way. The image looked clearer but no cigar. I'm 
going to try and change the setting on the 6D itself to macro, not sure what 
will happen and if it will even let me change the setting while it's connected 
to the PC.
        >>>>
        >>>> I would like more input on my thoughts if possible.
        >>>>
        >>>> Aissa
        >>>>
        >>>> A.D. sent by iPhone
        >>>>
        >>>>
        >>>>> On Aug 8, 2014, at 10:16 PM, Jeremy Pantell 
<jpantell@xxxxxxxxxxxxx> wrote:
        >>>>>
        >>>>> HI AISSA!  I guess the question is whether the Canon 6D/Zeiss 2X 
adapter will "parfocal" with the Zeiss eyepiece.  I would focus off your 
monitor while trying to come up with a better solution.  When using the 2X with 
a film setup there was no particular magic about it.  Just focus very carefully 
and compose within the viewfinder grid.  Good patients would yield very nice 
results.
        >>>>>
        >>>>> sincerely, jeremy p. pantell bfa cra
        >>>>>
        >>>>>
        >>>>> On Friday, August 8, 2014 4:06 PM, Aissa Dirawatun 
<aissa9400@xxxxxxxxx> wrote:
        >>>>>
        >>>>>
        >>>>> Hello everyone,
        >>>>>
        >>>>> Our practice purchased a Zeiss 2x lens adapter for our FF4 (w/ 
Canon 6D) camera to use for ONH pictures. I'm having trouble focusing the 
image. I need your advice.
        >>>>>
        >>>>> Thank you!
        >>>>>
        >>>>> Aissa Dirawatun, COA
        >>>>> Ophthalmic Photographer/Technician
        >>>>> Virginia Retina Center
        >>>>> 20 Rock Pointe Lane Suite 20
        >>>>> Warrenton, VA 20155
        >>>>>
        >>>>> --
        >>>>> "Reading makes immigrants of us all. It takes us away from home, 
but more important, it finds homes for us everywhere." ~ Jean Rhys 1890-1979
        >
        
        



________________________________

IMPORTANT WARNING: The information in this message (and the documents attached 
to it, if any) is confidential and may be legally privileged. It is intended 
solely for the addressee. Access to this message by anyone else is 
unauthorized. If you are not the intended recipient, any disclosure, copying, 
distribution or any action taken, or omitted to be taken, in reliance on it is 
prohibited and may be unlawful. If you have received this message in error, 
please delete all electronic copies of this message (and the documents attached 
to it, if any), destroy any hard copies you may have created and notify me 
immediately by replying to this email. Thank you. Geisinger Health System 
utilizes an encryption process to safeguard Protected Health Information and 
other confidential data contained in external e-mail messages. If email is 
encrypted, the recipient will receive an e-mail instructing them to sign on to 
the Geisinger Health System Secure E-mail Message Center to retrieve the 
encrypted e-mail.

<<winmail.dat>>

Other related posts: