[modeleng] Re: Welding Advice
- From: Allen Messer <al_messer@xxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Sun, 6 Nov 2005 15:19:16 -0800 (PST)
Just makw sure that the shelf life of the "hardener"
has not expired.
Al Messer
--- David Everett <deverett2003@xxxxxxxxxxx> wrote:
> Roger
>
> Try Devcon epoxy steel. It sticks like Sh** to a
> blanket. It can be drilled and tapped if
> necessary.
>
> Regards
>
> Dave
> Saudi-Arabia-On-Sea
>
>
> --- Roger Mason <roger.g3tdm@xxxxxxxxxx> wrote:
>
> > am torn between
> > drilling them deeper and tapping them and screwing
> in a screw and filing
> > or machining flush or filling the dimple with
> some weld metal.
>
>
>
>
___________________________________________________________
>
> How much free photo storage do you get? Store your
> holiday
> snaps for FREE with Yahoo! Photos
> http://uk.photos.yahoo.com
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email
> to,
> modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject line.
>
__________________________________
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
