Hi You can get this stuff from RS components, Check there web sit for your nearest trade counter, Although trade only you can normally pay cash at the trade counters. Regards Nigel Ball Leicester Just come in after a day spent machining My Sweetpea wheels and axle boxes!!, Well it was too wet to go in the garden! In a message dated 06/11/2005 17:06:24 GMT Standard Time, shep.28@xxxxxxxxxxxx writes: Hi Roger Earlier this year, I bought the slides of BCA jig borer from a chap in Sussex. The surface of the built-in rotary table was pitted, and he had filled in the holes with a metal-loaded epoxy, and ground these level with the surface. Except for the difference in colour, this has made a very acceptable repair, without submitting the rotary table to further machining or welding. Many years ago, I repaired a damaged cylinder on a printing machine in a similar manner. If you care to contact me at shep.28@xxxxxxxxxxxx, I will give you his email address, and I am sure that he will give you a source of supply for this excelent product. Cheers! Hubert in wet St Albans MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.