Hi Barrie What a beautiful restoration job! I am green with envy! Cheers! Hubert ----- Original Message ----- From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Tuesday, August 15, 2006 11:30 AM Subject: [modeleng] Re: ... New Loco > > Thanks Alan. I must point out that I did not make the engine. It was made > locally 1990 by a guy by the name of Geoff Gregson who made four. He sadly > died and the engine was sold several times before ending up dumped in a > barn. > I got my hands on it and completely stripped it. The pistons and piston > valves had to be hammered out. All the motion work bearings were shot, the > main drivers had substantial grooves on the treads, two of them were loose > on their axle and most of the twiddly bits (handrails, beading etc.) were > bent or missing. > I had heard rumours that the boiler was "lagged" with lead and, when I > removed the cladding sure enough, it was -55lbs of it, and another 55lbs > between the frames. > I rebored the cylinders then sleeved them back to the original size, made > new piston valves and liners, shrunk on new steel tyres, made new safety > valves (all four of them), renewed all the motion bearings, stripped all the > paint work and repainted it. > It's next appearance will be at the Nottingham Club next Saturday then > Gilling the Saturday after. > > Cheers, > > > Barrie > > > Barrie Puslow's Duchess, a very nice example I must add, > > can be seen at: > > > > http://www.alanstepney.info/bp.html > > > > > > Alan > > MODEL ENGINEERING DISCUSSION LIST. > > > > To UNSUBSCRIBE from this list, send a blank email to, > > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > > line. > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.9/417 - Release Date: 11/08/2006 > > > > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.