Re: [MoAccess] Sonar not recognizing xs
- From: "Jes" <jesman598@xxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Tue, 16 Oct 2007 12:37:15 -0400
Then what does the remote mode do? What's its purpose? I thought you said that
you should have it switched off when working in Sonar.
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Tuesday, October 16, 2007 7:53 AM
Subject: Re: [MoAccess] Sonar not recognizing xs
It doesn't sound like the Motif is in the song mode. Push the song button.
You don't need to do anything with a remote setting in Utility mode. The
remote button turns on and off the control surface mode, which has no affect on
recording MIDI tracks.
Bryan
------------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On
Behalf Of Jes
Sent: Tuesday, October 16, 2007 4:36 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Sonar not recognizing xs
I got the midi ports on the xs to be recognized in sonar, but now whenever I
try and record or playback something, I get no metronome and nothing from the
xs. As an example, when I try and change the patches to prepare the track for
recording, the patches on the xs show up fine in Sonar, but whenever I arrow up
and down, Sonar doesn't tell the xs to switch patches to match the patch
selection. I might arrow to a trumpet patch but I still get a grand piano when
I play the xs while I'm in the patch selection box. I downloaded sonar real
producer 6, and I'm creating midi-only tracks, no audio. If I recall, the
manual says something about turning off remote mode on the midi page under the
utility menu? I haven't done that yet. However, doesn't the remote on/off
button do the same thing?
Jes
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Tuesday, October 16, 2007 1:31 AM
Subject: Re: [MoAccess] Sonar not recognizing xs
The MIDI ports for the Motif appear in Options|MIDI Devices. You must place
checkmarks next to all of the Yamaha ports in order for them to show up as
input and output choices on individual tracks.
If the ports don't show up in MIDI Devices, then you didn't install the
Motif USB drivers, or you didn't install the drivers for the MIDI interface
where the Motif is attached.
Bryan
----------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Jes
Sent: Monday, October 15, 2007 10:53 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Sonar not recognizing xs
Hi. I downloaded a trial of sonar 6 producer or something like that,
haven't used sonar in a long while. For some reason, the xs is not showing up
as a midi controler for inputs and outputs. What should I do?
Other related posts:
