Re: [MoAccess] Sonar not recognizing xs
- From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Tue, 16 Oct 2007 07:53:43 -0400
It doesn't sound like the Motif is in the song mode. Push the song
button.
You don't need to do anything with a remote setting in Utility mode. The
remote button turns on and off the control surface mode, which has no
affect on recording MIDI tracks.
Bryan
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Jes
Sent: Tuesday, October 16, 2007 4:36 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Sonar not recognizing xs
I got the midi ports on the xs to be recognized in sonar, but now
whenever I try and record or playback something, I get no metronome and
nothing from the xs. As an example, when I try and change the patches to
prepare the track for recording, the patches on the xs show up fine in
Sonar, but whenever I arrow up and down, Sonar doesn't tell the xs to
switch patches to match the patch selection. I might arrow to a trumpet
patch but I still get a grand piano when I play the xs while I'm in the
patch selection box. I downloaded sonar real producer 6, and I'm
creating midi-only tracks, no audio. If I recall, the manual says
something about turning off remote mode on the midi page under the
utility menu? I haven't done that yet. However, doesn't the remote
on/off button do the same thing?
Jes
----- Original Message -----
From: Bryan Smart <mailto:bryansmart@xxxxxxxxxxxxxx>
To: MoAccess@xxxxxxxxxxxxx
Sent: Tuesday, October 16, 2007 1:31 AM
Subject: Re: [MoAccess] Sonar not recognizing xs
The MIDI ports for the Motif appear in Options|MIDI Devices. You
must place checkmarks next to all of the Yamaha ports in order for them
to show up as input and output choices on individual tracks.
If the ports don't show up in MIDI Devices, then you didn't
install the Motif USB drivers, or you didn't install the drivers for the
MIDI interface where the Motif is attached.
Bryan
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Jes
Sent: Monday, October 15, 2007 10:53 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Sonar not recognizing xs
Hi. I downloaded a trial of sonar 6 producer or something like
that, haven't used sonar in a long while. For some reason, the xs is not
showing up as a midi controler for inputs and outputs. What should I do?
Other related posts:
