Re: [MoAccess] Sonar not recognizing xs
- From: "Jes" <jesman598@xxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Tue, 16 Oct 2007 13:22:36 -0400
Okay. How do I get to the local mode setting, and I notice that every time I
switch to song mode, a guitar voice comes up as the default instrument. Of
course I am able to sort of select a number of voices through the keypad on the
right, but there isn't as wide of a choice list as I have when I am in voice
mode. Darn it all I just wish Sonar would . well . just work with this
synthesizer straight out of the box! As yall can see I'm a bit frustrated.
Jes
----- Original Message -----
From: driza97@xxxxxxxxxxxxx
To: MoAccess@xxxxxxxxxxxxx
Sent: Tuesday, October 16, 2007 1:48 PM
Subject: Re: [MoAccess] Sonar not recognizing xs
you should have local mode switched off when working ins Sonar!!
What Da Hzzy!
Driza aka Drizabizeats
----- Original Message -----
From: Jes
To: MoAccess@xxxxxxxxxxxxx
Sent: Tuesday, October 16, 2007 11:37 AM
Subject: Re: [MoAccess] Sonar not recognizing xs
Then what does the remote mode do? What's its purpose? I thought you said
that you should have it switched off when working in Sonar.
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Tuesday, October 16, 2007 7:53 AM
Subject: Re: [MoAccess] Sonar not recognizing xs
It doesn't sound like the Motif is in the song mode. Push the song button.
You don't need to do anything with a remote setting in Utility mode. The
remote button turns on and off the control surface mode, which has no affect on
recording MIDI tracks.
Bryan
--------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Jes
Sent: Tuesday, October 16, 2007 4:36 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] Sonar not recognizing xs
I got the midi ports on the xs to be recognized in sonar, but now
whenever I try and record or playback something, I get no metronome and nothing
from the xs. As an example, when I try and change the patches to prepare the
track for recording, the patches on the xs show up fine in Sonar, but whenever
I arrow up and down, Sonar doesn't tell the xs to switch patches to match the
patch selection. I might arrow to a trumpet patch but I still get a grand piano
when I play the xs while I'm in the patch selection box. I downloaded sonar
real producer 6, and I'm creating midi-only tracks, no audio. If I recall, the
manual says something about turning off remote mode on the midi page under the
utility menu? I haven't done that yet. However, doesn't the remote on/off
button do the same thing?
Jes
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Tuesday, October 16, 2007 1:31 AM
Subject: Re: [MoAccess] Sonar not recognizing xs
The MIDI ports for the Motif appear in Options|MIDI Devices. You must
place checkmarks next to all of the Yamaha ports in order for them to show up
as input and output choices on individual tracks.
If the ports don't show up in MIDI Devices, then you didn't install the
Motif USB drivers, or you didn't install the drivers for the MIDI interface
where the Motif is attached.
Bryan
------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Jes
Sent: Monday, October 15, 2007 10:53 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Sonar not recognizing xs
Hi. I downloaded a trial of sonar 6 producer or something like that,
haven't used sonar in a long while. For some reason, the xs is not showing up
as a midi controler for inputs and outputs. What should I do?
Other related posts:
