[j-say list] Re: Help: Still Problems with microphone after upgrade
- From: Fiona Williams <fiona.williams@xxxxxxxxxxxxxx>
- To: "j-say@xxxxxxxxxxxxx" <j-say@xxxxxxxxxxxxx>
- Date: Wed, 19 Oct 2011 09:35:09 +0100
Following up on Brian's note.
I get your point about Volume for JAWS. But it is at a low level already.
Didnt know that Dragon could wake/up by itself.
I will try with microphonecompletely off. Though keyboard alternative is not a
great option at the moment.
Thanks, Fiona
On 19 Oct 2011, at 09:19, "Brian Hartgen" <Brian.Hartgen@xxxxxxxxxxxxxxxxxxxxx>
wrote:
> Hi Fiona
>
>
>
> I don’t want to point out the obvious, but, have you tried turning down the
> volume of the speech? I just wonder if jaws is being captured by the
> microphone. Starting with Dragon 11.0, and quite prevalent in 11.5, when the
> microphone is asleep it does tend to capture unwanted sound more than the 10
> or 9 series. I don’t know why that is. Presumably if you physically turn off
> the microphone with shift F11 things are OK?
>
>
>
> Brian
>
>
>
>
>
> From: j-say-bounce@xxxxxxxxxxxxx [mailto:j-say-bounce@xxxxxxxxxxxxx] On
> Behalf Of Fiona Williams
> Sent: Wednesday, 19 October 2011 8:26 AM
> To: j-say@xxxxxxxxxxxxx
> Subject: [j-say list] Help: Still Problems with microphone after upgrade
>
>
>
> Hello,
>
>
>
> Would appreciate the list’s help. Still have problems with microphone after
> upgrade. Original email below. I’ve done the microphone check and replaced
> the voice profile from an earlier back-up. Please let me know your
> suggestions.
>
>
>
> Thanks,
>
> Fiona
>
>
>
> From: Fiona Williams [mailto:fiona.williams@xxxxxxxxxxxxxx]
> Sent: 14 October 2011 17:03
> To: 'j-say@xxxxxxxxxxxxx'
> Subject: Help: Problems with microphone after upgrade
>
>
>
> Hello,
>
>
>
> I upgraded to Jaws 12.0.1170, Dragon 11.5 and J-Say 9.1 this afternoon
> (running on Windows 7).
>
>
>
> My microphone is suddenly behaving very strangely. It’s the one which comes
> with Dragon and has been fine until now. Now my microphone will turn itself
> on from sleep mode by itself. Also when microphone is asleep, and JAWS is
> reading a document, it will suddenly turn itself on. Then it tries to
> interpret background sounds or JAWS speech.
>
>
>
> As an aside, now occasionally my laptop will suddenly try bring up the Print
> Dialog window – when the microphone is asleep, and JAWS is reading.
>
>
>
> Suggests for fixes please!
>
>
>
> Thanks in advance,
>
> Fiona
Other related posts:
