Did both of these things already. They are not the problem, apparently.
Thanks, Kevin
Hispeeds up sliding and moving vias from dead slow to immediate. Now the button don't
I'm also on 15.1
At present I have disable dyn shapes and also set all power layers to negative as this
-----------------------------------------------------------
Check if all layers with dyn copper areas are set to positive, and check that shape updating is set to smooth.
Peter Sørensen
MTS Engineer
Ethernet Product Group
Vitesse Semiconductor Corporation
Location: Denmark
Tlf +45 4485-5996
Cell +45 4050-7098
Fax. +45 4485-5939
-----Original Message----- From: Julian Ungureanu [mailto:jungurea@xxxxxxxxx] Sent: 22. december 2004 00:59 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: update shapes...
Kevin McCowan wrote:
The yellow box on mine is flat. Not a button.
You should still be able to push it. At least this is how 15.2 works.
I checked the help and it also says to push the button to locate them. What is the deal here? Will I ever be allowed to finish this design?
I'm on 15.1 with the latest SR. The isolated shapes color thing is a button as is the unassigned shapes. It says: Out of date shapes: 2/33 I thought there might be a report or something but I couldn't find one. Of course, since the shapes are "out of date" I cannot generate gerbers.
Any other ideas? Anyone?
Kevin
Julian Ungureanu wrote:
When you go to "Setup - dwg options", there is a yellow box you can click on.-----------------------------------------------------------
That fires a report, where you can click on the X or Y coordinate of your shape.
And it takes you right there.
Pretty neat.
Julian
Kevin McCowan wrote:
Ok, me again. My Setup/drawing options says I have 2 out of date shapes. I cannot figure out which they are. Or how to update them. I ran dbdoctor and it made no difference. Reported nothing back. I hope I didn't use up all of my December help credits yet!
Any ideas?
Kevin McCowan
Sr. PCB Designer
TSI Telsys
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------