[PCB_FORUM] Re: update shapes...

Just for kicks, you might try to set shapes to rough or disabled, run dbdoctor, 
then update them to smooth and see what it does. Just a stab in the dark...

-----Original Message-----
From: Kevin McCowan [mailto:kmccowan@xxxxxxxxxxxxxx] 
Sent: Wednesday, December 22, 2004 8:56 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: update shapes...

Did both of these things already. They are not
the problem, apparently.

Thanks,
Kevin

Peter_Sørensen wrote:
> Hi 
> 
> I'm also on 15.1
> 
> At present I have disable dyn shapes and also set all power layers to 
> negative as this
speeds up sliding and moving vias from dead slow to 
immediate. Now the button don't
work in my design either. To get it to work please check the 
following:
> 
> Check if all layers with dyn copper areas are set to positive, and check that 
> shape updating is set to smooth.
> 
> Peter Sørensen
> MTS Engineer
> Ethernet Product Group
> Vitesse Semiconductor Corporation
> Location: Denmark
> Tlf    +45 4485-5996
> Cell  +45 4050-7098
> Fax. +45 4485-5939 
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Julian Ungureanu [mailto:jungurea@xxxxxxxxx]
> Sent: 22. december 2004 00:59
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: update shapes...
> 
> 
> 
> 
> Kevin McCowan wrote:
> 
> 
>>The yellow box on mine is flat. Not a button. 
> 
> 
> You should still be able to push it.
> At least this is how 15.2 works.
> 
> 
>>I checked the help and it also says to push the
>>button to locate them. What is the deal here?
>>Will I ever be allowed to finish this design?
>>
>>I'm on 15.1 with the latest SR. The isolated shapes
>>color thing is a button as is the unassigned shapes.
>>It says: Out of date shapes:   2/33
>>I thought there might be a report or something but
>>I couldn't find one.
>>Of course, since the shapes are "out of date" I
>>cannot generate gerbers.
>>
>>Any other ideas? Anyone?
>>
>>Kevin
>>
>>Julian Ungureanu wrote:
>>
>>
>>>When you go to "Setup - dwg options", there is a yellow box you can 
>>>click on.
>>>That fires a report, where you can click on the X or Y coordinate of 
>>>your shape.
>>>And it takes you right there.
>>>Pretty neat.
>>>
>>>Julian
>>>
>>>Kevin McCowan wrote:
>>>
>>>
>>>>Ok, me again.
>>>>My Setup/drawing options says I have 2 out of date shapes.
>>>>I cannot figure out which they are.
>>>>Or how to update them.
>>>>I ran dbdoctor and it made no difference.
>>>>Reported nothing back.
>>>>I hope I didn't use up all of my December help credits yet!
>>>>
>>>>Any ideas?
>>>>
>>>>Kevin McCowan
>>>>Sr. PCB Designer
>>>>TSI Telsys
>>>>-----------------------------------------------------------
>>>>To subscribe/unsubscribe:     Send a message to 
>>>>icu-pcb-forum-request@xxxxxxxxxxxxx
>>>>    with a subject of subscribe or unsubscribe
>>>>
>>>>To view the archives of this list please login at
>>>>http://www.freelists.org. Our list name is icu-pcb-forum
>>>>or go to http://www.freelists.org/archives/icu-pcb-forum/
>>>>
>>>>Problems or Questions:
>>>>    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>>>>
>>>>Want to post a job listing ?  DON'T DO IT HERE!  Better yet, join 
>>>>our jobs listing forum.
>>>>
>>>>SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
>>>>POST:       icu-jobs-forum@xxxxxxxxxx
>>>>-----------------------------------------------------------
>>>>
>>>
>>-----------------------------------------------------------
>>To subscribe/unsubscribe:     Send a message to 
>>icu-pcb-forum-request@xxxxxxxxxxxxx
>>    with a subject of subscribe or unsubscribe
>>
>>To view the archives of this list please login at
>>http://www.freelists.org. Our list name is icu-pcb-forum
>>or go to http://www.freelists.org/archives/icu-pcb-forum/
>>
>>Problems or Questions:
>>    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>>
>>Want to post a job listing ?  DON'T DO IT HERE!  Better yet, join our 
>>jobs listing forum.
>>
>>SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
>>POST:       icu-jobs-forum@xxxxxxxxxx
>>-----------------------------------------------------------
>>
> 
> 
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: